Flashing a VU+ Uno using a USB stick

[Pattyren]

USB stick should be formatted to fat32.

1. Create a folder in USB stick called vuplus.
2. Within the the vuplus directory create another folder called uno.
3. Unzip the USB upgrade files (4) into that directory.
The 4 files are :
boot_cfe_auto.jffs2
kernel_cfe_auto.bin
root_cfe_auto.jffs2
splash_cfe_auto.bin
4. Power off your VU+ Uno.
5. Insert memory stick into front USB slot.
7. Power on your VU+ Uno and follow the on screen instructions.

On Screen Instructions will include press ch- on the Uno receiver (not remote) to initiate flashing. This must be done within 10 seconds. Once done it will advise you to remove USB Stick and reboot.

Thanks to author

 

[Shadowfax]

Thanks! Really helpful

Just a question, when you say "power off" you mean from the I/O switch on the back of the box?

 

[leonkoum]

Thanks!
Really helpful

 

[georgeflu]

Thanks! Really helpful

Just a question, when you say "power off" you mean from the I/O switch on the back of the box?

yes my friend!

 

[bojja]

yes my friend!

Yes just switch off from the back of the vu switch take off the usb pen drive from the front...and switch on again the back switch to install the image :thum: