firmware duolabs STOP???

[gogix]

firmware from duolabs stop build img for qboxhd??

 

[zeros]

No STOP from the users ;-)
In May we have here a number of appendices on innovation.

 

[hizach]

No STOP from the users ;-)
In May we have here a number of appendices on innovation.

can you elaborate on this ?

 

[victor]

old firmware working fine last year
no need new firmware

 

[Superglud]

?! New firmware is very much needed !

1. Audio

Still no sound on Danish DVB-T MPEG4 channels. audio codec HE-ACC (v2)
(Other sat boxes are able to decode HE-ACC (v2) codec.)


2. PVR

..2a. Continuing from where you stopped viewing, is still not working (Starts from beginning)

..2b. "Fast forward" is not fast (only 8x) (Rewind has same problem)


3. Teletext

..3a. Please route the teletext signal to the television set.
(This feature is working in all my other sat boxes)

..3b. Heavy Teletext usage causes random crashes


4. Wifi ?

Configuration choice is not appearing, so i cannot setup wifi


5. Nervous remote control


6. terrestrial.xml (Additional frequencies for Copenhagen(dk))

Please add the following frequencies to "etc/tuxbox/terrestrial.xml" Copenhagen(dk)

Additional frequencies

<transponder centre_frequency="213000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="482000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />

---------------------------------------------------------------------

After adding the new frequencies
"etc/tuxbox/terrestrial.xml" Copenhagen(dk)
will look like this

- <terrestrial name="Copenhagen(dk)" flags="5">
<transponder centre_frequency="213000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="482000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="506000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="522000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="546000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="554000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="570000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="578000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="586000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="610000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="634000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="642000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="650000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="714000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="730000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="738000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="770000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="786000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="794000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
<transponder centre_frequency="834000000" bandwidth="0" constellation="2" code_rate_hp="1" code_rate_lp="6" guard_interval="2" transmission_mode="1" hierarchy_information="0" inversion="2" />
</terrestrial>

 

[zeros]

Hi Superglud!
I response to your submissions my opinions:
1) We look forward to a solution.We hope that the solution is coming soon.
2) a. could be but see b.
b. watch Online User Guide http://www.duolabs.com/download/userguide/QBoxHD_UG_02_en.pdf
Page 43 and Page 50. Skipping in a recording with Buttons 1,4,7 and 3,6,9. It is convenient to use this method to scroll faster. If You need then You can change the differences but I believe that this is not required.
3) We here have a minor fault with national Sub-sets letters but it is not hard to fix that. This mistake exist in all enigma2 boxes and I make also to DM the error description.
4) Mine WiFi worked in the past but I confirm this problem with the latest official software.
5) Here is all right. What do you mean with nervous remote control?
6) You need to write that in Duolabs forum.

All the best,
Z

 

[Superglud]

Hi zeros

thanks for your reply

Summary:


1. Audio

Still no sound on Danish DVB-T MPEG4 channels. audio codec HE-ACC (v2)
(Other sat boxes are able to decode HE-ACC (v2) codec.)

Reply(zeros): 1) We look forward to a solution. We hope that the solution is coming soon.

Re-reply(superglud):
Indeed, have been waiting since 02-06-2009


2. PVR

..2a. Continuing from where you stopped viewing, is still not working (Starts from beginning)

Reply(zeros): 2a) a. could be but see b.

Re-reply(superglud):
Have been working in older FD firmware, but it is not working now, that is a fact

..2b. "Fast forward" is not fast (only 8x) (Rewind has same problem)

Reply(zeros): 2b)
Skipping in a recording with Buttons 1,4,7 and 3,6,9. It is convenient to use this method to scroll faster.

Re-reply(superglud):
Super thanks I didn't know


3. Teletext

..3a. Please route the teletext signal to the television set.
(This feature is working in all my other sat boxes)

Reply(zeros): 3a)
We here have a minor fault with national Sub-sets letters but it is not hard to fix that. This mistake exist in all enigma2 boxes and I make also to DM the error description.

Re-reply(superglud):
Looking forward to a solution

..3b. Heavy Teletext usage causes random crashes

Not commented (No Reply(zeros): 3b)


4. Wifi ?

Configuration choice is not appearing, so i cannot setup wifi

Reply(zeros): 4)
Mine WiFi worked in the past but I confirm this problem with the latest official software.

Re-reply(superglud):
Looking forward to a solution


5. Nervous remote control

Reply(zeros): 5)
Here is all right. What do you mean with nervous remote control?

Re-reply(superglud):
Sometimes the remote is acting too quick, especially in teletext
Sometimes the remote is acting to slow / delayed (stacking the input)
In general the remote is too "direction sensitive"

Keep up the good work

Best regards

 

[Superglud]

Hi zeros

No STOP from the users ;-)
In May we have here a number of appendices on innovation.

when can we expect some news from duolabs regarding qboxhd ?

 

[zeros]

Unfortunately I do not know.

 

[kostasbmw]

which is the best firmware for qboxhd at the moment??official or not?

 

[bogyman]

i think no more support from duolabs
i heared they got suied by " v i a x s "
and they paid a lot of $$$$ to hire lawyers for the court

 

[empb]

i think no more support from duolabs
i heared they got suied by " v i a x s "
and they paid a lot of $$$$ to hire lawyers for the court

Any links to news articles about duolabs being sued?

 

[leonardua]

any advise? Which is the best firmare the Official or the Sifteam?