Emu Camd
- Thread starter zorionak
- Start date
SCAM is EMU that (used alone) ususally does no cardsharing over the internet.
So, you needn´t open HTTP ports on your internet router.
Just install SCAM to use internal card reader instead of CI module.
SCAM 3.59 works o.k. for me with dreambox8000 (enigma2 - but enigma1 boxes are possible as well).
SCAM 3.60 is said to make more problems.
Don´t know which one for your box, but you´ll find them here
http://www.sat-universe.com/forumdisplay.php?f=30
-----
Homesharing,
when boxes with SCAM installed on them are attached to same router, is possible, though.
(With additional config lines you can connect to other softcams, too and then share beyond your home, - but like myself you don´t want to do this, as you write.)
---
But, in case you should want to connect two of your own boxes at home, I add two config files.
1) Files must be copied (with "dcc"´s FTP function) from your pc to your boxes
to /usr/scam (enigma1)
or /etc/scam (enigma2).
2) Files must (right-click with mouse on file in dcc= dreambox control center ´s FTP window) be renamed to
config
3). Set file rights ("attributes", whe you right click on file) to 755
4) Only one file must be edited - the renamed (clientbox) config .
Don´t use Windows Notepad to edit - use dcc instead!!!
In dcc´s FTP window you can use a built in editor (right click config file with your mouse).
Replace IP-adress in config file by IP-adress of your hostbox and save config file.
Full reboot both boxes - host first - client afterwards (works better than only restart SCAM).
Should work then.
I add DCC (for Enigma1) and DCC2 (for Enigma2), too. Many languages can be set. Program doesn´t need to be installed. Lots of functions.
So, you needn´t open HTTP ports on your internet router.
Just install SCAM to use internal card reader instead of CI module.
SCAM 3.59 works o.k. for me with dreambox8000 (enigma2 - but enigma1 boxes are possible as well).
SCAM 3.60 is said to make more problems.
Don´t know which one for your box, but you´ll find them here
http://www.sat-universe.com/forumdisplay.php?f=30
-----
Homesharing,
when boxes with SCAM installed on them are attached to same router, is possible, though.
(With additional config lines you can connect to other softcams, too and then share beyond your home, - but like myself you don´t want to do this, as you write.)
---
But, in case you should want to connect two of your own boxes at home, I add two config files.
1) Files must be copied (with "dcc"´s FTP function) from your pc to your boxes
to /usr/scam (enigma1)
or /etc/scam (enigma2).
2) Files must (right-click with mouse on file in dcc= dreambox control center ´s FTP window) be renamed to
config
3). Set file rights ("attributes", whe you right click on file) to 755
4) Only one file must be edited - the renamed (clientbox) config .
Don´t use Windows Notepad to edit - use dcc instead!!!
In dcc´s FTP window you can use a built in editor (right click config file with your mouse).
Replace IP-adress in config file by IP-adress of your hostbox and save config file.
Full reboot both boxes - host first - client afterwards (works better than only restart SCAM).
Should work then.
I add DCC (for Enigma1) and DCC2 (for Enigma2), too. Many languages can be set. Program doesn´t need to be installed. Lots of functions.
Last edited:
Ooops! You´re right!
Sorry all, who downloaded for wrong satbox:mecry:.
SCAM no good for sh4 (like in Qbox).
Dreamboxes o.k., though.
Tried only SCAM and CCCAM on my dreamboxes up to now. Both emus work - but CCCAM didn´t like s*y SELECT/SELECT HD on dreamboxes - therefore SCAM for me now).
SH4 possible versions afaik for example Oscam, IncubusCamd, camd, sbox, gbox. But can´t say, which one better for Qbox.
Sorry all, who downloaded for wrong satbox:mecry:.
SCAM no good for sh4 (like in Qbox).
Dreamboxes o.k., though.
Tried only SCAM and CCCAM on my dreamboxes up to now. Both emus work - but CCCAM didn´t like s*y SELECT/SELECT HD on dreamboxes - therefore SCAM for me now).
SH4 possible versions afaik for example Oscam, IncubusCamd, camd, sbox, gbox. But can´t say, which one better for Qbox.
Last edited:
R*I Channels on Hotbird 13º not Works.
B*SS Channels not works.
It seem only works in Crypt**** channels.
you need incubuscamd emu
I've tried Incubuscamd 0.97 and not works for me.
Last edited:
Did you only install Incubuscamd or did you start it (automatically or manually by script) as well?
I don´t know how to do it with incubus on qbox (start the cam - I´ve got script language built in in my dreambox´s firmware to start my scam)
---
You can as well try CCCam. You needn´t share cards, if you don´t want to. Then you just install CCCam without any config files.
But, of course, CCCam must be started, too, to work (automatically or manually by script).
http://www.sat-universe.com/forumdisplay.php?f=21
---
If you don´t get anything to work, perhaps the following might do???
Only posted it here, because the description sounded, as if it worked automatically, when procedures are followed but I have no idea about it
.
Radar CAM
http://www.sat-universe.com/showthread.php?t=125938
Edit: Took me long time to google. Warcraft posted same time, but more quickly. Try his file first!!!
I don´t know how to do it with incubus on qbox (start the cam - I´ve got script language built in in my dreambox´s firmware to start my scam)
---
You can as well try CCCam. You needn´t share cards, if you don´t want to. Then you just install CCCam without any config files.
But, of course, CCCam must be started, too, to work (automatically or manually by script).
http://www.sat-universe.com/forumdisplay.php?f=21
---
If you don´t get anything to work, perhaps the following might do???
Only posted it here, because the description sounded, as if it worked automatically, when procedures are followed but I have no idea about it
.Radar CAM
http://www.sat-universe.com/showthread.php?t=125938
Edit: Took me long time to google. Warcraft
posted same time, but more quickly. Try his file first!!!
Last edited:
Did you only install Incubuscamd or did you start it (automatically or manually by script) as well?
I don´t know how to do it with incubus on qbox (start the cam - I´ve got script language built in in my dreambox´s firmware to start my scam)
---
You can as well try CCCam. You needn´t share cards, if you don´t want to. Then you just install CCCam without any config files.
But, of course, CCCam must be started, too, to work (automatically or manually by script).
http://www.sat-universe.com/forumdisplay.php?f=21
---
If you don´t get anything to work, perhaps the following might do???
Only posted it here, because the description sounded, as if it worked automatically, when procedures are followed but I have no idea about it
Radar CAM
http://www.sat-universe.com/showthread.php?t=125938
Edit: Took me long time to google. Warcraft
Dear friend ararat..
hello again ..i want to inform you that CCcam emu
unfortunately does not
work on qboxhd or any other sh.4 prossesor,it will be great
sometime Uvadi team to compile cccam for sh.4
Regards.............
It does not?
I believe you, of course, warkraft, if you say so. I think you know better about qbox.
But, why the heck did I find "CCcam for Qbox sh4" some minutes ago, when I googled?
Perhaps an article by somebody, who wanted to help another and only wrote a lot of rubbish that he had googled (like I did:mecry: - LOL).
----
Edit: Don´t find the link I mentioned above, but found:
h**p://www.sat-planet.net/showthread.php?t=5275
Well I don´t know all qboxes - but such links made me think CCcam would do.
I believe you, of course, warkraft
, if you say so. I think you know better about qbox.But, why the heck did I find "CCcam for Qbox sh4" some minutes ago, when I googled?
Perhaps an article by somebody, who wanted to help another and only wrote a lot of rubbish that he had googled (like I did:mecry: - LOL).
----
Edit: Don´t find the link I mentioned above, but found:
h**p://www.sat-planet.net/showthread.php?t=5275
Well I don´t know all qboxes - but such links made me think CCcam would do
.
Last edited: