drivers for the Sky Blu DTT USB stick.

[paperk]

hi, after loading openpli 12.3 on my dreambox 800 HD SE CLONE, I'm looking for the drivers for the Sky Blu DTT USB stick.
what should I download? Thank you

 

[maumixio]

try these two, 9015 should be ok

 

[paperk]

hi,
thanks, I'll try. then I'll let you know the result.
regards

 

[paperk]

HI,
downloaded directly from the decoder, and restarted.
going to settings, tuner and scan, tuner configuration, the terrestrial tuner is not visible.
Do I miss any steps?
Which USB to use, the one above or the one below?
Thank you, regards

 

[maumixio]

I don't have DM800 since many years ago, try both drivers and make a full restart. my Sky Blu works on DM900 and Dream Elite Image or SatLodge not with open images such as Opli or OpenATV at least make sure it is A867

 

[paperk]

Hi, sorry if I'm only posting now, work has kept me away from the PC.
I checked the DTT key and it's A867.
step by step
I unload the driver,
settings
tuner configuration
the dtt is not there!
what's wrong?

 

[lonoe]

Not all images work with these drivers which clone is'','''?'

 

[paperk]

thanks,
openpli 12.3 on my dreambox 800 HD SE CLONE
bye

 

[piterfree]

telnet...

opkg update
opkg install --force-overwrite v4l-dvb-module-dvb-usb
opkg install --force-overwrite v4l-dvb-module-dvb-a867
reboot
---------------------------------------------------------------------

For DM : 800 hd
opkg update
opkg install --force-overwrite v4l-dvb-module-dvb-usb
opkg install --force-overwrite v4l-dvb-module-dvb-a867
reboot
---------------------------------------------------------------------
openpli da telnet
opkg update
opkg install kernel-module-dvb-usb-a867
opkg install firmware-dvb-usb-a867
opkg install kernel-module-dvb-usb
opkg install firmware-dvb-module-usb-af9035
opkg install kernel-dvb-module-usb-af9035
opkg install firmware-dvb-module-usb-af9015
opkg install kernel-dvb-module-usb-af9015

 

[paperk]

hi,
ok, thanks I'll try

 

[paperk]

hi,
it didn't work for me. it just messed up my decoder, and I reinstalled the image.
but does anyone know the correct procedure to do, step by step?
which decoder USB to use? up or down?
Thank you