remember:
(english traslate):
oscam.conf , oscam.server and oscam.user were combined to doscam.cfg
-> All the other config files have been renamed as follows :
doscam.dvbapi
doscam.srvid
doscam.services
doscam.tiers
doscam.guess
doscam.whitelist
doscam.provid
doscam.ac
- Pin codes can be defined now in doscam.cfg under [ pincode ]
-> Format: HHHHHHHHHHHHHHHH : XXXX (H = Hexserial , 8 digits and Webif under the Entitlements to read, X = 4-digit pin)
- > Example of map with Hexserial 0000AABBCCDD0000 and Pin 1234 :
[ pincode ]
0000AABBCCDD0000 1234
- AES keys can be defined now in doscam.cfg under [ crypto ]
- > Format for AES Keys : A: CAID : provid : keyid : aesKey
-> The A stands for AES. Later there will possibly be other things in [ crypto ]
- > Example 0500:030 B00 :
[ crypto ]
A: 0500:030 B00 : 0D : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
- Rate limits can be now defined as in doscam.cfg under [rate limit]
-> Format: CAID : [ provid ]: [ srvid ]: [ chid ] : Ratelimitecm : Rate Limit Time (ms): Srvidholdtime (ms )
-> Entries in square brackets are optional
- > Example of 0100:00006 A for all SIDs :
[rate limit]
0100:00006 A ::: 4:11000 :
- New Reader Parameters " slots " which to define it in a quad Mouse, MCR and similar devices superfluous , for each slot a reader
-> The device must always only the first slot are specified
- > Example of operation with a quad Mouse ( 4 slots) :
[ reader]
label = quad
protocol = mouse
device = / dev/ttyUSB0
slots = 4
group = 1
- > Example of operation with a MCR8 (8 slots) :
[ reader]
label = MCR8
protocol = sc8in1
device = / dev/ttyUSB0 : 1
slots = 8
detect = cts
group = 1
- Improvements in the DVBApi for request_mode = 1
- Improvements in the automatic recognition of internal slots
- Bug in CCCam protocol now fixed , which could lead to freezers
- Now fixed a few rare segfaults
- Adjustments in the T14 protocol for Coolstream devices
-
New BISS format ( ONID sid VPID ), for example F onidsidvpid 00 XXXXXXXXXXXXXXXX
- Gbox protocol adapted so that it remains compatible with the OSCam (long ecm support and gbox_my_password under [ gbox ] instead of [ reader] )
- CacheEX , CSP and CW Cycle check from the code
Original german:
oscam.conf, oscam.server und oscam.user wurden zu doscam.cfg vereint
-> Alle übrigen Config-Dateien wurden wie folgt umbenannt:
doscam.dvbapi
doscam.srvid
doscam.services
doscam.tiers
doscam.guess
doscam.whitelist
doscam.provid
doscam.ac
- Pincodes können ab jetzt in doscam.cfg unter [pincode] definiert werden
-> Format: HHHHHHHHHHHHHHHH:XXXX (H=Hexserial, 8-stellig und im Webif unter den Entitlements ablesbar, X=4-stelliger Pin)
-> Beispiel für Karte mit Hexserial 0000AABBCCDD0000 und Pin 1234:
[pincode]
0000AABBCCDD0000:1234
- AES Keys können ab jetzt in doscam.cfg unter [crypto] definiert werden
-> Format für AES-Keys: A:CAID
rovID:KeyID:AESKey
-> Das A steht für AES. Später wird es ggf. noch andere Sachen unter [crypto] geben
-> Beispiel für 0500:030B00:
[crypto]
A:0500:030B00:0D:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
- Ratelimits können ab jetzt in doscam.cfg unter [ratelimit] definiert werden
-> Format: CAID:[ProvID]:[Srvid]:[Chid]:Ratelimitecm:Ratelimittime(ms):Srvidholdtime(ms)
-> Einträge in eckigen Klammern sind optional
-> Beispiel für 0100:00006A für alle SIDs:
[ratelimit]
0100:00006A:::4:11000:
- Neuer Reader-Parameter "slots", der es bei einer Quadmouse, MCR und ähnlichen Geräten überflüssig macht, für jeden Slot einen Reader zu definieren
-> Als device muss immer nur der erste Slot angegeben werden
-> Beispiel für einen Betrieb mit einer Quadmouse (4 Slots):
[reader]
label = quad
protocol = mouse
device = /dev/ttyUSB0
slots = 4
group = 1
-> Beispiel für einen Betrieb mit einem MCR8 (8 Slots):
[reader]
label = mcr8
protocol = sc8in1
device = /dev/ttyUSB0:1
slots = 8
detect = cts
group = 1
- Verbesserungen in der DVBApi für request_mode = 1
- Verbesserungen bei der automatischen Erkennung von internen Slots
- Bug in CCCam-Protokoll gefixed, der zu Freezern führen konnte
- ein paar seltene Segfaults gefixed
- Anpassungen im T14-Protokoll für Coolstream-Geräte
- neues BISS-Format (onid sid vpid), z.B. F onidsidvpid 00 XXXXXXXXXXXXXXXX
- gbox-Protokoll angepasst, damit es weiterhin mit der OSCam kompatibel ist (long ecm support und gbox_my_password unter [gbox] statt [reader])
- CacheEX, CSP und CW Cycle Check vom Code entfernt