DONGLE (Update &Software & Chat)

S

suny_skt008

Registered
Messages
24
After passing the software Disconnect the power supply from Aldnkl then filled

Now click on the button of the remote Red (audio) will make you the option of no yas

And press ok to take him back to the factory settings and then Link Cable Alaqt made on the Moon Hotber

And press the green button on the remote (pause) You'll notice that the green light in Aldnkl has worked

Wait a period of five minutes for that to happen the same Aldnkl by the moon Hotberd after extinguishing system, then he will note

Has been added to the version number 122 and Dunkel Aiza Micro now add feature of the remote press menu on the matter

And go to the third line, the last change your settings to the Micro Twin depending on the type of device feature enabled

Available in Alrsvr

And finally delivered the cable between rs232 and Alrsvr Aldnkl and enjoyment of all available channels encoded

Regards
 
Z

zoooom

Registered
Messages
227
suny_skt008 said:
After passing the software Disconnect the power supply from Aldnkl then filled

Now click on the button of the remote Red (audio) will make you the option of no yas

And press ok to take him back to the factory settings and then Link Cable Alaqt made on the Moon Hotber

And press the green button on the remote (pause) You'll notice that the green light in Aldnkl has worked

Wait a period of five minutes for that to happen the same Aldnkl by the moon Hotberd after extinguishing system, then he will note

Has been added to the version number 122 and Dunkel Aiza Micro now add feature of the remote press menu on the matter

And go to the third line, the last change your settings to the Micro Twin depending on the type of device feature enabled

Available in Alrsvr

And finally delivered the cable between rs232 and Alrsvr Aldnkl and enjoyment of all available channels encoded

Regards
Click to expand...

yes its working
 
M

marokino08

Super VIP
Messages
7,462
Software Microbox

D 15-6-2009

In Hotbird

===================================
1. How to update the Microbox ????
===================================
There are 2 ways to update software(end user can choose either of them)

===================================
1.1 PC update tool: DO-UP-V1.1.exe
1.1.1 Switch OFF( not ON ) the power supply of the Microbox;
1.1.2 Connect the Microbox and PC with twist RS232 cable (PIN2-->PIN3, PIN3-->PIN2, PIN5-->PIN5);
1.1.3 Open "Do-UP-V1.1.exe" and select the COM port, Click "Start" button;
1.1.4 Switch ON the power supply of the Microbox;
1.1.5 Waiting update ......
1.1.6 Restart the Microbox.

===================================
1.2 PC update tool: DongleUP.exe
1.2.1 Connect the Microbox and PC with twist RS232 cable (PIN2-->PIN3, PIN3-->PIN2, PIN5-->PIN5);
1.2.2 Switch on the power supply of the Microbox;
1.2.3 Press POWER_KEY by remote control,then it will enter standby mode;
1.2.4 Open "DongleUP.exe", then click "Open" button to select the file that will be downloaded,then press "Start" button;
1.2.5 The progress bar on tool will show progress, after finish updating please restart the Microbox.


===================================
2. OTA Downloading New Software
===================================
2.1 Connect Hotbird signal cable and bootup microbox then enter menu to set Diseqc port if necessary;
2.2 Wait for downloading new software. If signal LED blink don't power off microbox !!!! After finish downloading, signal LED will always light on.

( OTA new software will be ready within 2 days )


 
B

bozomustafa_68

Registered
Messages
16,935
New software MB_V1.1.

Microbox 15-6-2009



===================================
1. How to update the Microbox ????
===================================
There are 2 ways to update software(end user can choose either of them)

===================================
1.1 PC update tool: DO-UP-V1.1.exe
1.1.1 Switch OFF( not ON ) the power supply of the Microbox;
1.1.2 Connect the Microbox and PC with twist RS232 cable (PIN2-->PIN3, PIN3-->PIN2, PIN5-->PIN5);
1.1.3 Open "Do-UP-V1.1.exe" and select the COM port, Click "Start" button;
1.1.4 Switch ON the power supply of the Microbox;
1.1.5 Waiting update ......
1.1.6 Restart the Microbox.

===================================
1.2 PC update tool: DongleUP.exe
1.2.1 Connect the Microbox and PC with twist RS232 cable (PIN2-->PIN3, PIN3-->PIN2, PIN5-->PIN5);
1.2.2 Switch on the power supply of the Microbox;
1.2.3 Press POWER_KEY by remote control,then it will enter standby mode;
1.2.4 Open "DongleUP.exe", then click "Open" button to select the file that will be downloaded,then press "Start" button;
1.2.5 The progress bar on tool will show progress, after finish updating please restart the Microbox.


===================================
2. OTA Downloading New Software
===================================
2.1 Connect Hotbird signal cable and bootup microbox then enter menu to set Diseqc port if necessary;
2.2 Wait for downloading new software. If signal LED blink don't power off microbox !!!! After wait for about 5 minutes it will auto reboot.
 
Last edited:
Z

zoooom

Registered
Messages
227
polash_2005 said:
wait 2days maybe it rise
Click to expand...

atgr said:
hi marokino what mean opening after 5 minutes
Click to expand...

atgr said:
hello ABI any new news for microbox
Click to expand...

its working 2day update. u'll update new software 2day & remove the 12v adaptor & u wait 10 or 20 minits then u start microbox its come v1.22/L.08 THEN PRESS GREEN BOTTON IN REMOT ITS GET SIGNEL FROM HOTBIRD then press menu make micro to mini conect with reciever its working ART,SHOWTIME,HOTBIRD&EUROBIRD BUT NOT WORKING ORBIT
 
A

ABI.M

Registered
Messages
323
METHOD OF MICROBOX UPDATED VIA OTA


First: the Link Cable dongel is installed on hotbird
Second: microbox ota software instaled

III: After the update of the link and click on the red button in the Remote dongel (Audio) to return the body to the direction of al-factory (yes) to the plant will be



Fourth: Restart dongel through it and then disconnect the power back and wait (five minutes or more or less) will show you the words that tell you there is a new product, click OK
Fifth: At the end of the successful modernization and waited two minutes and then power of electricity, then a promising operation
Sixth: you will make a new and around 1.22 to the (twin) and then (ok), then congratulations, you


I hope I have succeeded in my simple


Note: If you did not work dongel has updated once again by the computer
 
A

ABI.M

Registered
Messages
323
After installing the software Disconnect the power supply from Dongal

Now click on the button of the remote Red (audio) it will appear the option of No or Yas

And press ok for the factory settings and then connect the to the hotbird satellite

And press the green button on the remote (pause) You'll notice that the green light is blinking on the dongal

Wait five minutes on the Hotbird to upgrade it then you will see the new version 122 is installed

on the remote press menu change settings to twin protocol you will see the problem is solved

DOWNLOAD NOW[/B
http://up2.upload.pk/uploads/1245164774.rar
 
You must log in or register to reply here.
Top