I have a DM800SE SUNRAY with blackhole image on it. The problem is that when am watching channels on some particular tps after few seconds the TUNER will fail,until i move to another channel on different tp then the channel will start to work again. I have tried many images the same result. These particular tps are not hd,just sd. But the TUNER is stable on all other channels,so am confused.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
DM800SE SUNRAY TUNER PROBLEM
- Thread starter badaru1
- Start date
Try rescanning the channel and activate network.
Also make sure that your satellite setup is set according to the type of your DiseqC.
Try activating Sequence repeat in Tuner configuration.
If the wire between your receiver and dish is too long or of inferior quality, activate increase voltage.
Also make sure that your satellite setup is set according to the type of your DiseqC.
Try activating Sequence repeat in Tuner configuration.
If the wire between your receiver and dish is too long or of inferior quality, activate increase voltage.