dm800 image capacity

[jojo30]

Hi everybody,
has anybody noticed how much is the free capacity of the memory after installing any image. I used to have the oozoon version 1.6
and did not had any problem, I could even put another skin and some other plugins taken full advantage of the memory capacity i had. After some reinstalling of other images because of an usb stick failure, i saw that i had left 3 to 4mb ram left of total 60mb capacity. I can't move a bit, i hardy can put any cam inside and then that's it, its full. While the temporary ram has 70mb, I just don't get it. I turned back to my old image but the situation remains the same, no luck of free memory. Do you have any suggestions?

 

[Ferret]

Your best bet is to use say Oozoon in flash and Barry allen and boot image with BA from your stick. You could also use flash expander myabe rambo plugins to have your plugin on stick.

 

[jojo30]

Your best bet is to use say Oozoon in flash and Barry allen and boot image with BA from your stick. You could also use flash expander myabe rambo plugins to have your plugin on stick.

barry allen is instaled on root right? if so o'm not able to do so because i only i have left 3mb ram free and i can't.

 

[DISKSS]

I do agree with Ferret.

 

[Ferret]

There has to be more space on a oozoon image.

Fresh flash and start from there with no updates or plugins added to the flash image.

 

[jojo30]

There has to be more space on a oozoon image.

Fresh flash and start from there with no updates or plugins added to the flash image.

What you say its true, I cant just believe my eyes. I had no problem before and now it sucks. How do I fresh my memory?
Could it be something with the secondstage.
I remember i had flash it once (before all this problems occur)
in an old image, i flashed then with 84 secondstage and ever since i have little memory left and i cant even flash my box to enigma 2.0 because of lack of memory space

 

[Ferret]

If your using oe2.0 image these are heavy, go back to oe1.6 images.

 

[jojo30]

I am to 1.6 and i have this full ram problem without installing any plugin or addon. Its only the image nothing more i cant put any other skin or anyrhing else because of lack of space

Στάλθηκε από το GT-I9100 μου χρησιμοποιώντας Tapatalk 2

 

[jojo30]

what do you get of this message
'' too much data (or bad sectors) in partition 1 (end: 00040000, pos: 00040000) ''

after trying to install an old image

 

[Ferret]

what do you get of this message
'' too much data (or bad sectors) in partition 1 (end: 00040000, pos: 00040000) ''

after trying to install an old image

That mean your flash is faulty, try flash with DReamUP but select the recover bad sectors option from the eatrx option tab before flashing.

 

[jojo30]

As a matter of fact, i believe thats must be the solution. I have been searching it, since your last advice, to google and almost all have reccoment it. I will try it later on, this afternoon and i will keep you post it.

Στάλθηκε από το GT-I9100 μου χρησιμοποιώντας Tapatalk 2

 

[jojo30]

Yes indeed, for all the other friends facing a similar problem, the solution is flashing serial but before do enable fix bad secrtors at the extra menu bar. Thank you all for your support, especially Ferret for his help.

Στάλθηκε από το GT-I9100 μου χρησιμοποιώντας Tapatalk 2