Discussion about DvbViewer Pro

ARA$H

Banned
Messages
1,081
ARA$H çok teşekkürler sağolasın. emeğine sağlık



DVBViewer Pro v6.1.5 kurarken ;

Önceki gibi Kanalları Hazır ayarlı halde kullanmak için C:\ProgramData’daki CMUV klasörünü yedekleyin.
bu yeri normalde c diskinde görünmez görünür yapmak için üsteki menüden görünüme tıklayıp gizli ögeler tıklı olsun. ProgramData çıkar
programı kurarken key tool cancel tıkla çıkan pencereye tamam de. programı açmadan çık program klasörüne crack dosyasındakileri kopyalayın

bu önemli; kullanım şeklinde yazmamışlar. Kesinlikle program klasöründeki KEY TOOL yönetici olarak çalıştırın yoksa key ve ad password giremezsiniz. key file karşısındaki kutucuğa tıklayın
çıkan pencerenden indirdiğiniz program ile gelen 1234567890ABCDEF.dvbvkey bulup aç tıkla
ve "Username and Password" kısmına kopyala yapıştırın
Username..: [email protected]
Password..: DOLO-LOLO-LOLO-LOLE
save tıkla çık tamamdır.
Full ekranda VideoRec.dll ile kayıt oluyor densede plugine atsakta. Kayıt olmuyor . bende ekranı köşeden mouse ile büyüterek full ekran yaparak kayıt oluyor
DVBViewer kullanacaklara daha kolay kullanmaları için ;
1-- aynı tp yi yani aynı gruba ait kanalları aynı anda açıp izlemek , kaydetmek için yani aynı grrupta olan mesela; show tv yi açıp kaydederken aynı anda habertürk tvyi açın kaydedin aynı anda bloomberg tvyi açın kaydedin oldumu size 3 kanalı aynı anda kaydetme ve izleme imkanı bunun için picture in picture aktif etmelisiniz ; options kısmından picture in picture kısmındaki tv/radio pre-format detection altındaki video ve audio seçeneklerine tık işareti koymalısınız ve apply tıklayıp ve ok tıklayın
2-- kanal listesini ekranın sağ yada solunda gösterme yolu;
seçenekler kısmına tıkla tv/radyo kısmına tıkla popup channel list yazısına tık işareti koy ve popup channel list yazısı karşısındaki left yada right şıkkını işaretle artık fareyi ekranda sağa yada sola getirince kanal listesi görünecektir.kanal listesi altındaki yıldıza tıklarsanız sadece favori kanallarınız görünecektir .sevdiğiniz kanalları kolayca izlersiniz .
3-- kanalları değiştirirken çıkan kocaman gereksiz altyazı şeridini göstermemesi için; seçenekler kısmından EPG penceresindeki show epg info on channel change-duration in seconds karşısındaki 4 rakamını 0 yapın
Please type English
 

Polderon

New member
Messages
1

Anybody tested it? Thank you!
 

ray_bk

New member
Messages
2
I tested DVBViewer Pro v6.1.5 Incl Crack.
As reported by NOD32, the cracked DVBViewer.exe has a trojan, A Variant Of Win32/Packed.Themida.ASK. I'm not sure if it's false alarm.
After installation and crack, I can start DVBViewer to watch TV. However, the record function does not work after going to full screen.
 

ARA$H

Banned
Messages
1,081
Change Log DVBViewer Pro 6.1.5.2 (Hotfix Release)

Fix: Hardware: Switching between the DVB-S2/T2/C reception types with the TBS 5580 USB box did not work.
Fix: Hardware: Auto-detection of DVB-T2 and additional DVB-T2 (MPLP) sub-streams on a channel search and reception of other than the first DVB-T2 sub-stream did not work with TBS devices.
Added: General: Basic support for the Chinese video format AVS (including AVS+ and AVS2) and the audio format DRA, so that channels that are using these formats can be found with a channel search, received and recorded, but not played yet (see here).
Change: Picture in Picture: Enhanced resize handling of the separate PiP Window if it sticks to one of the screen edges.
 

n3o

New member
Messages
12
here
https://www.mediafire.com/file/u0hh...DVBViewer_Basic_Media_Server_2.1.5.2.rar/file

there are DVBViewer Pro 6.1.5.2 retail setup (I have also verified with demo setup of official site and sizes of the files are different) & addon DVBViewer Basic Media Server 2.1.5.2 (this isn't available as demo in the official site so I think that is retail setup, even if I don't understand what does it mean "Basic" word)

if you want or know somebody that can help you, please crack it
 

Dardrous

New member
Messages
24
Information for our customers (-> German version).



First the short version for those who have not much time to read:



The old Recording Service is no more available in the download area, and there will be no support for it anymore. It has been replaced by a new product called "DVBViewer Media Server Basic" (short form "DMS Basic"). It is free for users who have purchased DVBViewer Pro and requires no additional licence.



DMS Basic is a basic or "light" version of the well known DVBViewer Media Server. It is able to work as background recording engine and DVB hardware administration for applications belonging to the DVBViewer family (particularly DVBViewer Pro/GE and TransEdit) that are running on the same PC. There are no restrictions in this respect.



Additionally DMS Basic serves as trial version for customers who are considering to buy the Media Server full version. DMS Basic can be used to access media (TV, radio, video and audio files...) in the home network, for example on other PCs, smartphones or even TV sets. Compared to the full version, there are some limitations:



DMS Basic is a single-user product. It cannot deliver two or more streams simultaneously, except as Sat>IP (RTSP) server to clients belonging to the DVBViewer family on the same PC.
Clients are restricted to read-only (guest) access, except if DVBViewer Pro or a browser showing the Web Interfacer is running on the server PC. The restriction applies to Media Server add-ons and clients (including DVBViewer) that are running on remote devices. They can play a media stream and display the EPG, but are not able to create or change timers, execute tasks, delete recordings, remote-control DVBViewer, change the Media Server configuration etc.
The conversion (transcoding) of TV/Video to another format or bit rate is restricted to a maximum resolution of 640 x 360. This particularly applies to TV and video playback in a browser. The full version can deliver HD resolution (1280 x 720).
DMS Basic cannot automatically update the EPG and create timers according to EPG search criteria.
DMS Basic cannot send an e-mail notification after a recording is finished.
EPG monitoring for automatically adjusting timers to a changed start time and starting/stopping recordings by the EPG running status is not available.
Recordings can be transcoded to MKV/MP4/MP3 by specifying the appropriate “after-recording-task” in the timer, but not at a later point in time.
The Media Page of the web interface does not display statistics (how often / when last played).


If you want more, you can easily upgrade to the DVBViewer Media Server full version. After ordering by using the “Help -> Order/Unlock Add-Ons menu item” in DVBViewer and paying 19,- €, all you have to do is to download it, install it "over" the basic version and enter the licence data that you have received via e-mail.



Answers to questions that you may want to ask:



Why has the Recording Service been removed from the download area? It can do some things that DMS Basic can't.
The Recording Service hasn't been developed any further since 2017. There is an increasing number of known bugs (also security issues) and incompatibilities with recent DVBViewer versions. In contrast to the out-dated Recording Service DMS Basic will be updated continuously in future. Media Server full version releases will be accompanied by corresponding DMS Basic releases. And last but not least we want to earn money by selling the Media Server full version. Without this we can't keep DVBViewer and Media Server development up.



Does DMS Basic as "trial version" expire after some time? Does it contain ads?
No. There are no ads and no time limits, only functional restrictions.



Why should I use the Media Server for "DVB hardware administration"?
The idea behind it is to let only the Media Server access and control DVB hardware directly. Clients receive a network stream if they want TV/Radio. This centralised management avoids conflicts, enables optimised hardware usage and allows to prioritise timer recordings, so that they are guaranteed to be executed, even if the required tuner is occupied by clients or activities like scanning. The server interrupts the stream if the hardware is needed for something more important.



What are the advantages of using DMS Basic as recording engine?
The Media Server is able to perform recordings in the background, even without a user being logged on in Windows. For scheduled recordings it can wake the PC from sleep mode or hibernate, which is easier than using the Windows Task Scheduler for it (as DVBViewer does). Additionally the Media Server allows to check timers and recordings on remote PCs/devices by using the Web Interface.



What does "web interface" mean in this context?
The Media Server has no conventional Windows user interface, but publishes a kind of web site. It can be opened in every browser in the home network in order to control the server, play streams, view the current status, change settings etc. There are two web interface versions: One for desktop computers and one for mobile devices with touch display.



How can DMS Basic receive EPG data without EPG update functionality?
Like DVBViewer, DMS Basic receives EPG data if a frequency gets tuned on which such data is broadcasted. Every recording or client receiving TV/Radio from the server triggers EPG reception. However, the full version is additionally able to collect EPG data by scanning frequencies automatically in the background, thus taking care that the EPG is complete, even for channels that are not tuned by a recording or client.



What is the "automatic timer creation" feature that is missing in DMS Basic?
It is based on the powerful EPG search function, that is also available in DMS Basic. "Automatic timer creation" (or short "auto-timer") means that the Media Server scans EPG data for search terms. A match automatically schedules a timer recording for the corresponding programme. You can let the Media Server full version execute this task after each EPG update. This feature can be used for series recording, for example. Several options allow to control how the search is performed and how timers are created. In DMS Basic you need to create the timers manually from the list of search results.
 

maximus333

New member
Messages
22
https://www.sat-universe.com/showpost.php?p=2037054075&postcount=148
DVBViewer_Pro_v6.1.5_Incl_Crack.zip

Note:
File contain:

Trojan:Win32/Vundo.RU

about Trojan:Win32/Vundo.RU:
https://www.microsoft.com/en-us/wds...on?Name=Trojan:Win32/Vundo.RU&threatId=200106

Trojan:Win32/Vundo.RU injects its entire code into all processes (except for browser processes) so that it has a persistent presence in your PC.

Trojan:Win32/Vundo.RU collects information about your PC and saves it into a file named cf in the Cookies folder. It collects the following information:
•Operating system version
•Operating system architecture (whether your PC is 32-bit or 64-bit)
•Whether your PC is running in a virtual or a physical environment

... etc.
 

ARA$H

Banned
Messages
1,081
DVBViewer Pro v6.1.5.2

https://www.up-4ever.org/u4z38gzszjbx

Passwort: YiwenSin
 

doc21

New member
Messages
3
DVBViewer Pro v6.1.5.2
File contain:
adware.jstartsurf

Adware.IStartSurf uses hijacked search results to deliver their advertisements on the affected system. Often, they also change an internet browser’s start page to their own search site.
 

serkanguzel

Active member
Messages
1,387
.
.

DVBViewer Demo v6.1.6


Change Log DVBViewer Demo v6.1.6 ( 12 Wednesday 2020 )

Added: Subtitle Options: Checkbox “Use teletext font for teletext, ATSC and ISDB subtitles” (default unchecked). If switched on, DVBViewer uses the (usually mono-spaced) font specified on the Teletext Options page for the mentioned subtitle types, which are typically output in a grid with fixed character positions. If switched off, DVBViewer uses the font selected on the Subtitle Options page and particularly displays teletext subtitles with variable spacing in case of a proportional font, thus enhancing the appearance and readability. However, not aligning the output to the teletext character grid may also have disadvantages (see here).
Added: Subtitle Options: Settings for adjusting the synchronization of subtitles with video. The value in the delay input line lets the subtitles appear x milliseconds later, or earlier in case of a negative delay. Checkboxes allow to separately switch the delay on and off for different subtitle types. A change takes effect immediately, but is reset on channel switching, stopping the video or if the Options Window is closed, unless clicking Apply makes it permanent.
Removed: Subtitle Options: Checkboxes in the Appearance section for switching shadow, outline and background transparency off. This can as well be achieved by moving the sliders to their leftmost position.
Removed: Teletext Options: Sliders for adjusting background transparency and outline of teletext subtitles. The functionality is now covered by correspondent sliders on the Subtitle Options page.
Fix: Hardware Options: Updated device list entries were not marked as available after “Scan Devices”, causing tuners, that were displayed in red due to a wrong device name, to remain red, though the name was corrected. “Scan Devices” did not add the SRx1000 entry (read from an updated hardware database) to an already existing DVB-C tuner in the file hardware.xml.
Added: Hardware Options: The TS Stream device settings dialog contains a new input line “Replace in URL”, allowing to vary the processed URL per device. It applies to HLS, internet radio and transport streams wrapped in HTTP(S). The syntax is [placeholder]=[device specific string], e.g. @@=username:password. A use case is described here (IPTV provider requiring x different accounts for receiving x streams simultaneously).
Fix: Hardware: If TBS 5520/5580 multistandard devices were configured and used for ISDB-T reception, DVBViewer switched the tuners to DVB-T mode on tuning (see here).
Fix: EPG: The erroneous “\n” inserted by some Austrian providers as line break indicator is now automatically replaced by a DVB compliant line break on EPG data reception.
Change: EPG: Auto-detection of the ISO 6937 and ISO 8859-2 character sets for some East European countries (particularly Poland, Romania, Hungary) where providers indicated them wrongly in the past years. DVBViewer now first assumes ISO 6937 and then tries to find a proof for ISO-8859-2 (previously the other way round). This handles true ISO 6937 always correctly, but may fail in certain cases where ISO-8859-2 is used with missing indication (see here).
Fix: EPG Window: When opened for the first time between 00:00 and 00:15 o'clock, the timeline showed an empty EPG for Saturday, 30 December 1899 (see here).
Fix: Channel Editor: Issues when using the New button while an audio sub-node is selected or after it was selected. The input form was not adjusted to the parent reception type or controls remained deactivated though a category was selected subsequently.
Added: TS Stream: Support for channels broadcasting via internet in HLS format with audio tracks provided as separate streams.
Added: TS Stream: Tweak “Receive all audio tracks of HLS streams” (→ launch Tweaker.exe). If switched on DVBViewer fetches all available audio tracks of HLS streams from the server, thus occupying more bandwidth. If switched off only the main audio track (marked as default by the provider) is fetched.
Fix: DVD Playback: Resuming playback at the last position could fail due to potential timing issues when retrieving the Disc ID.
Fix: Recorder. Lazy program response caused by uselessly repeated tune attempts once per second in case of a whole transponder recording, if the allocated device was not usable for this purpose. This particularly applied to all RTSP network devices, that by default are not configured for delivering a whole transponder. DVBViewer did not realize this until tuning was performed. Now only devices are allocated for such recordings, that either deliver the whole transponder anyway (most BDA devices) or can automatically be configured for it (unused RTSP network devices). However, whole transponder recording with RTSP devices may still be hindered by servers that do not support the pids=all parameter or by insufficient network bandwidth.
Fix: Main Window: Horizontal resizing of the Radio Window did not work correctly, if the mode was selected manually in the View menu (not by Options → TV/Radio → Auto-switch to TV/Radio Window.... ).
Added: Zoom Presets: Tweak “Number of zoom presets” (→ launch Tweaker.exe). It can be used to change the number of zoom presets. Four presets are set up by default. The Preset #x button in the Settings -> Zoom window or the "Zoom Next Preset" action switch over to the next preset.
Fix: HbbTV: Issues with Swiss HbbTV (see here) and other channels using erroneous JavaScript or broadcasting a HbbTV Application Information Table (AIT) with more than one section (particularly “Das Erste” in Germany).
Fix: HbbTV: If the tweak “Use browser cache for HbbTV” (see Tweaker.exe) was switched off, DVBViewer failed to clear the HbbTV cache completely, because files were still in use. Clearing the cache is now done right after DVBViewer start.
Fix: Component Downloader: Bug causing error code 406 in the server response on DVBViewer installation and when using the downloader separately.
 

calidad

New member
Messages
1
THANK U serkanguzel But after experimenting, I found the old 6.1.5 demo not 6.1.6 , I hope you will correct
 

serkanguzel

Active member
Messages
1,387
THANK U serkanguzel But after experimenting, I found the old 6.1.5 demo not 6.1.6, I hope you will correct

Hi mate, You are right.

I downloaded it here ;
_http://www.dvbviewer.tv/download/DVBViewer_setup_demo.exe


But released v6.1.6.
_https://www.dvbviewer.tv/forum/topic/59624-dvbviewer-600/?do=findComment&comment=486216

I think @hackbart forgot to upload the latest version.
 

satdvb999

New member
Messages
1
Any version without virus or adware? Thanks!
 

n3o

New member
Messages
12
DVBViewer Pro 6.1.6.1 and DVBViewer Media Server Full 6.1.6.1 retail setup

I have found on web DVBViewer Pro 6.1.6.1 and DVBViewer Media Server Full 6.1.6.1 retail setup... I don't have installed the 2 setup, however when I have opened DVBViewer Media Server setup the word "basic" wasn't showed, so I think that is full version according with limitation described here https://www.sat-universe.com/showpost.php?p=2037041704&postcount=445 .

Link of retail files setup is the following:

https://www.mediafire.com/file/xyjh1xrl7sbat4f/DVBViewer_Pro_6.1.6.1_and_DVBViewer_Media_Server_Full_6.1.6.1.rar/file

I hope that both DVBViewer Pro and DVBViewer Media Server are cracked and is solved the issues that are present from build 6.0.3.0: 1. after started the recording and set fullscreen mode, record is stopped; 2. if is used fullscreen mode, and resized window, if You try to use recorder feature, recorder don't start.

waiting for an answer,

best regards
 

mradu

New member
Messages
1
Hello
I am getting User data error 704: Please use KeyTool.exe to enter the correct data
 

ARA$H

Banned
Messages
1,081
DVBViewer Pro v6.1.6.1 Full

1.) Install

2.) During installation process do not enter anything to "DVBViewer Key Manager", just close it.
Setup will nag about KeyTool.exe too but just ignore it.

3.) When installation process is done, do not start the program yet.

4.) Copy cracked file(s) over originals and overwrite if asked.

5.) Start KeyTool.exe

6.) When asked for "Username and Password" use given information from below:

Username..: [email protected]
Password..: DOLO-LOLO-LOLO-LOLE

And save details by pressing "Save" button.

7.) Answer "Yes" to the question about "Storing the username, password..."

8.) All done.

NOTE: No, you can't download additional files with our release and also our release is missing
both add-ons, "HbbTV/MHEG-5 Engine" and "DVBViewer Media Server". If you have them...
damn you're lucky guy :) If you want those you'll have to buy your own license like we did!

And oh yea: NEVER APPLY ANY UPDATES!
 

n3o

New member
Messages
12
DVBViewer Pro v6.1.6.1 Full

1.) Install

2.) During installation process do not enter anything to "DVBViewer Key Manager", just close it.
Setup will nag about KeyTool.exe too but just ignore it.

3.) When installation process is done, do not start the program yet.

4.) Copy cracked file(s) over originals and overwrite if asked.

5.) Start KeyTool.exe

6.) When asked for "Username and Password" use given information from below:

Username..: [email protected]
Password..: DOLO-LOLO-LOLO-LOLE

And save details by pressing "Save" button.

7.) Answer "Yes" to the question about "Storing the username, password..."

8.) All done.

NOTE: No, you can't download additional files with our release and also our release is missing
both add-ons, "HbbTV/MHEG-5 Engine" and "DVBViewer Media Server". If you have them...
damn you're lucky guy :) If you want those you'll have to buy your own license like we did!

And oh yea: NEVER APPLY ANY UPDATES!

both dvb media server fixs doesn't work to me... there is some things to do? I don't have set data to information registration
 

n3o

New member
Messages
12
I have 800000FD error when try to start service :(

@ ARA$H : how can I find gerowina ?
 
Last edited:

n3o

New member
Messages
12
nobody have issue error 800000FD when try to start media server?

@ARA$H : please, can You tell me the site address of board where there's gerowina's team? Is he a reverser?
 
Top