Default No waiting on Rapidshare

RIDER

"Vanity is definitely my favorite sin"
Administrator
Registered
Messages
7,850
Default No waiting on Rapidshare
This trick is very useful for those who cannot use this method because the have static IP address. I use it and it really works.

To start off, you need a direct connection to your modem and computer. If you have a router, disconnect it and directly hook up your modem to your computer.

1. Open up the command prompt by pressing Start->Run and typing in cmd

2. In the command prompt, type “Ipconfig/all”. This will tell you your current IP Address. After, type “ipconfig/release”. Keep the command prompt open for easy access.

3. Go to “Network Connections” (accessible through the control panel). Right click “Local Area Connection” and click “Properties”

4. With “Internet Protocol (TCP/IP) selected, click the “Properties” button.

5. A new window will open. Under the “General” tab, select “Use the Following IP address”. Under “Ip Address”, put “10.0.0.10". Press the “Tab” key on your keyboard.

6. Press Ok on both open windows.

7. Repeat steps 3-4. Under the “General” tab, press the radio button “Automatically Assign Me an Ip Address”. Press ok on both windows.

8. Go back to the command prompt and type in “Ipconfig/all”. You’ll now notice you have a new IP address.
 

avantgarde

New member
Messages
12
It work only on public ip address ADSL and you must connect pppoe from your PC
 

aracer03

New member
Messages
1
this doesnt work if you are behind a router.you can create a macro that telnets your router and reconnects.
 

dhn66493

New member
Messages
1
ok yes
 
Top