Thank my friend
How can I bypass the merge?
With version 2.5 A problem appears as in the picture above
And with version 2.12 This problem appears
Thanks @orangebirds
First, open "Name" RBT menu, add the table folder where you put the rbtr2 (or rbt2 if you use v2.05) file like this, repeat with B8hxFFh and B8hx030000h.
Second, go to GPU menu, add your GPU server, run CSA_CUDA_Server and enable it.
Third, go to Chain Author menu, make sure you've set the chainauthor.map
Fourth, go to Search CW settings, select the table, only one table, and press start, if everything is correct, you will see Running status
Fifth, go to Crypt8 menu, select your encrypted TS file for Crypt8, press start, and if you see the rypt8 output, copy it
Finally, go to Search CW, paste the Crypt8 output from the Crypt8 menu, select the correct plain type, and press start
seem you got everything right..Thanks @orangebirds
I worked with your explanation of the process
Work on CSA-Rainbow-Table-Tool_Rv2.12
I used to do it before
Watch video
5 minutes have passed and CW has not been sent
I haven't tried it 2.05
I didn't have the rbt2 files due to lack of space
Is the video card the problem?
It's old, I bought it in 2011
Should I change it?
Card details
seem you got everything right..
card play a role but not by much, unless you want to make a new chain but it's no use for v2 version
try restart the app, and you should see two client in csa cuda server instead of one when you start the search
oh okay, I think I know...at 1.08 the second client appeared
and then disappeared ?
better download the v2 tables instead of Rv2 just in case Colibri didn't update the programNow it works perfectly
The reasons are as mentioned by the brothers
@klickklack
@orangebirds
@barney115
The first reason why the program does not work is due to protection and its solution is with program vpn
Secondly, stop the protection program and the firewall Antivirus
Third, adjust the ChainAuthor file
Now when I want to run the program
First, turn on vpn
Secondly, close the firewall and stop the anti-virus program
Third, run the program CSA-Rainbow-Table-Tool
Fourth, close vpn
I will buy ssd 4tb soon
And download the CSA_B8hx00h files
Are there any tips?
thanks for your support
orangebirds said:most of the time B8hxFFh is enough because most of the time the Crypt8 value found on the H264 video PID, but B8hx00h is used for Crypt8 from MPEG1/2 video/audio PID or Dolby E audio PID