Convert JST-1 on ST-1 stb

scurbat

Registered
Messages
134
Un' altro ottimo lavoro di grantor & TeChSat Team

Trasformazione del JST-1 in PVR-ST1



Utilizzando il firmware ST1-0017_N2PVR da me preparato è possibile trasformare in modo permanente il JST-1 in Pvr-ST1.

Il vantaggio dell'utilizzo di questa trasformazione è la possibilità di usufruire delle migliore del firmware 0.0.1.7:

- Gestione della card Sky.
- Gestione della card M.P. (direttamente nel card reader)
- Gestione della card TivuSat. (direttamente nel card reader)
- Incremento della velocità del cambio canale dato che non deve inizializzare la cam nel passaggio SAT/DTT.
- Apertura dei canali S1->S8 a 13.0°E



Unico inconveniente è un bug che non consente il corretto caricamento delle liste motor. E' tuttavia possibile ovviare a questo incoveniente cancellando qualche canale dalla lista in modo da ridurne il numero. Tale bug, segnalato, sarà risolto nella prossima versione di firmware.
I test effettuati non hanno evidenziato altre problematiche.

Ovviamente il decoder JST-1 così trasformato NON potrà in ogni caso essere utilizzato come PVR a causa delle differenti caratteristiche hardware.

Una volta caricato il firmware ST1-0017_N2PVR si dovranno utilizzare i firmware del Pvr-ST1.
E' tuttavia è possibile riportare il decoder al firmware originario (0.0.0.6) utilizzando il file ST1-0006_PVR2N

Code:
n' other optimal job of grantor  & TeChSat Team
Transformation of the JST-1 in PVR-ST1 Using firmware ST1-0017_N2PVR from prepared me it is possible to transform in permanent way the JST-1 in Pvr-ST1. The advantage dell' I use of this transformation is the possibility to have use of of the best one of firmware 0.0.1.7: 
- Management of card the Sky. - Management of card the M.P. (directly in the card reader) - Management of card the TivuSat. (directly in the card reader) - Increment of the speed of the change channel since the cam does not have to inizializzare in passage SAT/DTT. - 
Opening of the S1-> channels; S8 to 13.0°E 
Only disadvantage is a bug that does not concur the corrected loading of the lists motor. E' however possible to obviate to this incoveniente being cancelled some channel from the list so as to ridurne the number. Such bug, marked, will be resolved in the next version of firmware. The carried out tests have not evidenced other problematic ones. Obviously decoder the JST-1 thus transformed could not in any case be used like PVR because of the characteristic different hardware. Once loaded firmware ST1-0017_N2PVR firmware of the Pvr-ST1 will have to be used. E' however it is possible to bring back the decoder to original firmware (0.0.0.6) being used rows ST1-0006_PVR2N

[URL="http://www.mediafire.com/file/jmwho2htiin/ST1-0017_N2PVR.zip"]ST1-0017_N2PVR.zip[/URL]
[URL="http://www.mediafire.com/file/yzwmtm5mqyn/ST1-0006_PVR2N.zip"]ST1-0006_PVR2N.zip[/URL]
 
Top