cloud-ibox III DTTkey a867

[dragonfire]

I have this clone decoder, the tuner dtt-t2 does not work in Italy, tested with images of Ferret. the Italysat-6.0.140 Ibox3 Universal Bootloader Streaming By Special Ferret.
in the panel (blue button, red) you can download the drivers af9035 x, and telnet must be launched in the following commands:
opkg install kernel-module-mxl5007t
opkg install kernel-module-tda18218
did this and rebooted the decoder, the LED of the key is turned on, but the receiver remains stationary to boot. Ferret if you can help me thanks:mecry:

 

[Ferret]

Sorry mate

I do not have that tuner to try.

 

[dragonfire]

thank you for having responded Ferret, you could try a usb dtt tuner in your country if you have dtt channels, because the problem is not the driver but to start the tuner, the tuner setting and find them in the image menu.

 

[Ferret]

Does the DVBT tuner built in to the Ibox 3 not work for you ?

 

[dragonfire]

NO THE RECEIVER ON BOARD DOES NOT WORK IN ITALY, WHY IS A CLONE. DTT RECEIVER AND CREATE PROBLEMS OF THE CLONES (NEED CHANGE HARDWARE I THINK), THE PROBLEM WAS SOLVED WITH DECODER SOLD IN ITALY.
I WOULD LIKE TO RESOLVE IT BY PLACING THE A867 DRIVERS ARE THERE IN ITALYSAT, KEY BLUE, RED, DV AF 9035.-T MANAGER INSTALLED DRIVERS MUST ACTIVATE THROUGH TELNET COMMAND IN SOMETHING THAT IS RECOGNIZED BY THE KERNEL DTT TUNER FOR TO FIND IT IN TUNER SETUP. THIS CAN ALSO BE USEFUL TO THOSE WHO HAS THE EDGE TUNER DTT A WORKING TO MAKE THE DUAL TUNER DTT, 2 RECORD AND SEE DIFFERENT PROGRAMS ON 2 DIFFERENT FREQUENCIES ON DTT.