x Hapi :
I think I've it !!!
try this one please, I'm at work and I can't try until tonight....
Please, report again !!!
boot500c
thanks...
Now its boot thx but tuner not working.
dmesg
Linux version 2.6.9 (tux@tux) (gcc version 3.4.4) #1 Tue Feb 26 17:05:38 CET 2008
On node 0 totalpages: 8192
DMA zone: 8192 pages, LIFO batch:2
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=null root=/dev/mtdblock5 rootfstype=squashfs ro
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29992k available (1740k kernel code, 592k data, 80k init, 0k highmem)
Calibrating delay loop... 250.36 BogoMIPS (lpj=125184)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
devfs: 2004-01-31 Richard Gooch (
[email protected])
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
ttyS2 at MMIO 0x0 (irq = 22) is a 16550A
loop: loaded (max 8 devices)
ne.c:v1.10 9/23/94 Donald Becker (
[email protected])
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0xc3060600:<4>eth0: interrupt from stopped card
00 34 09 14 20 f4
eth0: NE2000 found at 0xc3060600, using IRQ 25.
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Using deadline io scheduler
dreambox: flash mapping: 800000 at 7f800000
DreamBOX rev3+: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x20000,blocks=64
disable flash VPP
Creating 7 MTD partitions on "DreamBOX rev3+":
0x00000000-0x00500000 : "DreamBOX cramfs+squashfs"
0x00500000-0x007c0000 : "DreamBOX jffs2"
0x007c0000-0x00800000 : "DreamBOX OpenBIOS"
0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"
0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"
0x00120000-0x00500000 : "DreamBOX SquashedFS"
0x00000000-0x00120000 : "DreamBOX Cramfs"
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
IBM IIC driver v2.1
ibm-iic0: using standard (100 kHz) mode
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k init
Warning: unable to open an initial console.
head: module license 'Proprietary' taints kernel.
cannot determine frontend type
framebuffer mem base: a0900000
0/0: 00004000 81f00000
0/1: 00000000 00000000
1/0: 20003000 80f00000
1/1: 00000000 00000000
trying to memset ..
ok.
fb_find_mode returned 0
allocated major 251 for denc.
[DENC] set PAL
[DENC] disable WSS
[DENC] disable WSS
[DENC] disable WSS
core: Loaded IBM STB02xx core driver
audio init
AUDIO_CLEAR_BUFFER
demux: init
xp0_clk_stop
stb04_pig: $Id: stb04_pig.c,v 1.14 2006/05/31 18:23:01 ghost Exp $
[DENC] set mode to FBAS
[DENC] set mode to FBAS
VIDEO_SELECT_SOURCE
open video clip-mode
VIDEO_CLEAR_BUFFER
VIDEO_PLAY / VIDEO_CONTINUE, state 1 0
write 1 event's ...
[DENC] disable WSS
VIDEO_STOP, state 0
set event: 00000049
[DENC] set mode to RGB
[DENC] set mode to FBAS
[DENC] set PAL
[DENC] set mode to RGB
[DENC] set mode to FBAS
[DENC] set PAL
[DENC] set WSS 4:3
[DENC] set PAL
[DENC] set mode to RGB
[DENC] set mode to FBAS
[DENC] set PAL
[DENC] set WSS 4:3
[DENC] set PAL
set event: 00000049
[DENC] set mode to RGB
[DENC] set mode to FBAS
[DENC] set PAL
[DENC] set mode to RGB
[DENC] set mode to FBAS
[DENC] set PAL
[DENC] set WSS 4:3
[DENC] set PAL
Now my problem is who to send the bin file to dreambox can I you CAS3?