anwarsheriff
Registered
- Messages
- 25
Guide for newbies for
How to setup a windows based pc as a cardServer with NewCS
Hi all
This is a small HowTo
Aftre of a lot of search on the net for cs(cardsharing) i found a lot of info about this but only for linux based pc.
Nothing about cs and cardserver with a windows based pc.
this is a newbie guide to CARDSHARING with pc as a server
So here is how to setup a win based pc as a Cardserver
What You need:
Hardware
a) A pc capable of running Windows XP or Windows 2000 with
1 network card
1 serial port
(memory and disk its not importand????...for cardsharing)
a) A serial card reader
c) a dsl connection (if you want to share your cards with others)
Software
a) Newcs 1.13 (in the atached file)
b) NewcsGui (a gui interface for the NewCS server)
(a and b files are incuded in the atach. zip file)
c) An clean text editor (like ultraedit)
Unzip the files in a directory
Edit the configuration file newcs.xml
1. find the line <node>COM2</node>
and put your com port where the cardreader its connected to yout pc
2. in the line <udp_host>192.168.0.101 </udp_host> put your pc ip address
3. in the <newcamdserver> section find the line <name>yourservername</name>
and put you cardserver name.
4. in user section put user name and pass
save the file
Now you are ready to run your server
Run the program newcsgui.exe and your server its ready
You can see any server activity in the file logfile.txt
Now your client can connect to the server using newcamd or mgcamd emu in port 10001 (default)
Just edit the configuration file newcamd.conf with server ip port username
password DES key and servername with the same values as the ones in newcs.xml
For wan connection you have to setup your router to forward all traffic in port 10001 to the pc's ip
Thats all you are UP and Running
Colossus
Sharer the NowHow
How to setup a windows based pc as a cardServer with NewCS
Hi all
This is a small HowTo
Aftre of a lot of search on the net for cs(cardsharing) i found a lot of info about this but only for linux based pc.
Nothing about cs and cardserver with a windows based pc.
this is a newbie guide to CARDSHARING with pc as a server
So here is how to setup a win based pc as a Cardserver
What You need:
Hardware
a) A pc capable of running Windows XP or Windows 2000 with
1 network card
1 serial port
(memory and disk its not importand????...for cardsharing)
a) A serial card reader
c) a dsl connection (if you want to share your cards with others)
Software
a) Newcs 1.13 (in the atached file)
b) NewcsGui (a gui interface for the NewCS server)
(a and b files are incuded in the atach. zip file)
c) An clean text editor (like ultraedit)
Unzip the files in a directory
Edit the configuration file newcs.xml
1. find the line <node>COM2</node>
and put your com port where the cardreader its connected to yout pc
2. in the line <udp_host>192.168.0.101 </udp_host> put your pc ip address
3. in the <newcamdserver> section find the line <name>yourservername</name>
and put you cardserver name.
4. in user section put user name and pass
save the file
Now you are ready to run your server
Run the program newcsgui.exe and your server its ready
You can see any server activity in the file logfile.txt
Now your client can connect to the server using newcamd or mgcamd emu in port 10001 (default)
Just edit the configuration file newcamd.conf with server ip port username
password DES key and servername with the same values as the ones in newcs.xml
For wan connection you have to setup your router to forward all traffic in port 10001 to the pc's ip
Thats all you are UP and Running
Colossus
Sharer the NowHow