Hi!
I can´t get E2 to work, i have tray on usb, hdd and now on flash.
I allways get the same results on logg.
I have install u-boot 1.3.3 to.
This is frome flash putty log.
--------------------------------------------
Logg:
U-Boot 1.3.1 (Oct 24 2008 - 18:09:07) - stm23-2008-03-19
Board: cuberevo (0x2D42C041)
Board: 12 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Setup mac address.
booting...
## Booting image at a0060000 ...
Image Name: Linux 2.6
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 1846381 Bytes = 1.8 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Warning: Unable to determine if kernel is built for 29- or 32-bit mode!
Starting kernel console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 rootfstype=jffs2 rw bigphysarea=10240 ip=192.x.x.x:192.x.x.x:192.x.x.x:255.255.255.0 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...
INIT: version 2.86 booting
[fp] ver. 08.03.27
[fp] init 12 dotmatrix vfd
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon.../etc/init.d/portmap: line 79: pidof: not found
.
LOADING MODULES
init AVS
init stmfb
load a/v firmware
init embx
init player
Segmentation fault
insmod: cannot insert '/lib/modules/player2.ko': unknown symbol in module
insmod: cannot insert '/lib/modules/sth264pp.ko': unknown symbol in module
insmod: cannot insert '/lib/modules/stmalloc.ko': unknown symbol in module
Opening frame buffer device `/dev/fb0 '
MODE: 576i50
DEBUG1:
74074 68 12 38 5 64 6
0 513
DEBUG2:
74074 69 12 41 5 63 3
0 1
config.outputid=1
showSinglePic /boot/bootlogo.mvi
LOADING e2
Mounting local filesystems...
mount: mounting /dev/sda1 on /hdd failed: Invalid argument
Cleaning /tmp.
mount: mounting /dev/sr0 on /media/dvd failed: No such device or address
mount: mounting /dev/sda1 on /hdd/movie failed: Invalid argument
Hostname: CubeRevo.
starting telnetd
Starting FTP server: vsftpd.
Sat Dec 12 20:00:00 CET 1970
starting e2->
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) gLCDDC
couldn't open LCD - load lcd.o!
+ (9) GFBDC
10240k video mem
FBIO_SET_MANUAL_BLIT: Inappropriate ioctl for device
gFBDC::setResolution(xres=720, yres=576)
fbClass::SetMode(nxRes=720, nyRes=576, nbpp=32)
VIDEO STOP
VIDEO_STOP failed
MODE: 576i50
DEBUG1:
74074 68 12 38 5 64 6
0 513
DEBUG2:
74074 69 12 41 5 63 3
0 1
config.outputid=1
VIDEO START
VIDEO_PLAY failed
bounds x=0, y=0, w=720, h=576
defrect x=0, y=0, w=720, h=576
x=54, y=59
1. 0, 0, 720, 576
VIDIOC_S_INPUT: ioctl error -1 : No such device
VIDIOC_S_CROP: ioctl error -1 : No such device
8620kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) Socket MMI
[eSocketMMIHandler] created successfully
+ (20) misc options
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) AVSwitch Driver
couldnt open /dev/avs !
+ (20) RC Input layer
+ (21) Console RC Driver
failed to open /dev/vc/0
+ (21) input device driver
Input device "Relook IR Keyboard" is a keyboard.
failed to open /dev/input/event1
Input device "" is not a keyboard.
failed to open /dev/input/event2
Input device "" is not a keyboard.
failed to open /dev/input/event3
Input device "" is not a keyboard.
Found 4 input devices!
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryMP3
eServiceFactoryMP3->
eStaticServiceMP3Info->
reached rl 70
---- opening lame channel db
reading services
main thread is non-idle! display spinner!
no spinner DC!
loaded 9090 services
scanning for frontends..
opening frontend 0
failed! (/dev/dvb/adapter0/frontend0) No such device
found 1 adapter, 0 frontends and 1 demux
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache
eWidgetDesktop::setPalette(gPixmap &pm)->
4
5
eWidgetDesktop::setPalette(gPixmap &pm)-<
Loading spinners...
found 4 spinner!
setIoPrio(int prio_class, int prio)->
ioprio_set(1, 0, 16387) 288
setIoPrio best-effort level 3 ok
setIoPrio(int prio_class, int prio)-<
python.execute(mytest, __main__);
main thread is non-idle! display spinner!
--------------------------------------------
Can some help me!
What is the problem?
regards
dreamnu
I can´t get E2 to work, i have tray on usb, hdd and now on flash.
I allways get the same results on logg.
I have install u-boot 1.3.3 to.
This is frome flash putty log.
--------------------------------------------
Logg:
U-Boot 1.3.1 (Oct 24 2008 - 18:09:07) - stm23-2008-03-19
Board: cuberevo (0x2D42C041)
Board: 12 dotmatrix vfd front
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
Setup mac address.
booting...
## Booting image at a0060000 ...
Image Name: Linux 2.6
Image Type: Blackfin Linux Kernel Image (gzip compressed)
Data Size: 1846381 Bytes = 1.8 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Warning: Unable to determine if kernel is built for 29- or 32-bit mode!
Starting kernel console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 rootfstype=jffs2 rw bigphysarea=10240 ip=192.x.x.x:192.x.x.x:192.x.x.x:255.255.255.0 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ...
INIT: version 2.86 booting
[fp] ver. 08.03.27
[fp] init 12 dotmatrix vfd
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon.../etc/init.d/portmap: line 79: pidof: not found
.
LOADING MODULES
init AVS
init stmfb
load a/v firmware
init embx
init player
Segmentation fault
insmod: cannot insert '/lib/modules/player2.ko': unknown symbol in module
insmod: cannot insert '/lib/modules/sth264pp.ko': unknown symbol in module
insmod: cannot insert '/lib/modules/stmalloc.ko': unknown symbol in module
Opening frame buffer device `/dev/fb0 '
MODE: 576i50
DEBUG1:
74074 68 12 38 5 64 6
0 513
DEBUG2:
74074 69 12 41 5 63 3
0 1
config.outputid=1
showSinglePic /boot/bootlogo.mvi
LOADING e2
Mounting local filesystems...
mount: mounting /dev/sda1 on /hdd failed: Invalid argument
Cleaning /tmp.
mount: mounting /dev/sr0 on /media/dvd failed: No such device or address
mount: mounting /dev/sda1 on /hdd/movie failed: Invalid argument
Hostname: CubeRevo.
starting telnetd
Starting FTP server: vsftpd.
Sat Dec 12 20:00:00 CET 1970
starting e2->
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) gLCDDC
couldn't open LCD - load lcd.o!
+ (9) GFBDC
10240k video mem
FBIO_SET_MANUAL_BLIT: Inappropriate ioctl for device
gFBDC::setResolution(xres=720, yres=576)
fbClass::SetMode(nxRes=720, nyRes=576, nbpp=32)
VIDEO STOP
VIDEO_STOP failed
MODE: 576i50
DEBUG1:
74074 68 12 38 5 64 6
0 513
DEBUG2:
74074 69 12 41 5 63 3
0 1
config.outputid=1
VIDEO START
VIDEO_PLAY failed
bounds x=0, y=0, w=720, h=576
defrect x=0, y=0, w=720, h=576
x=54, y=59
1. 0, 0, 720, 576
VIDIOC_S_INPUT: ioctl error -1 : No such device
VIDIOC_S_CROP: ioctl error -1 : No such device
8620kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) Socket MMI
[eSocketMMIHandler] created successfully
+ (20) misc options
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) AVSwitch Driver
couldnt open /dev/avs !
+ (20) RC Input layer
+ (21) Console RC Driver
failed to open /dev/vc/0
+ (21) input device driver
Input device "Relook IR Keyboard" is a keyboard.
failed to open /dev/input/event1
Input device "" is not a keyboard.
failed to open /dev/input/event2
Input device "" is not a keyboard.
failed to open /dev/input/event3
Input device "" is not a keyboard.
Found 4 input devices!
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
cannot open /proc/stb/tsmux/input0
cannot open /proc/stb/tsmux/input1
done, found 0 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) eServiceFactoryMP3
eServiceFactoryMP3->
eStaticServiceMP3Info->
reached rl 70
---- opening lame channel db
reading services
main thread is non-idle! display spinner!
no spinner DC!
loaded 9090 services
scanning for frontends..
opening frontend 0
failed! (/dev/dvb/adapter0/frontend0) No such device
found 1 adapter, 0 frontends and 1 demux
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache
eWidgetDesktop::setPalette(gPixmap &pm)->
4
5
eWidgetDesktop::setPalette(gPixmap &pm)-<
Loading spinners...
found 4 spinner!
setIoPrio(int prio_class, int prio)->
ioprio_set(1, 0, 16387) 288
setIoPrio best-effort level 3 ok
setIoPrio(int prio_class, int prio)-<
python.execute(mytest, __main__);
main thread is non-idle! display spinner!
--------------------------------------------
Can some help me!
What is the problem?
regards
dreamnu