good evening ... I have a Chinese receiver (hellobox) in the biss decoding the key is different from the decoding satellite card tbs 5980, key example: hellobox = d6ef89656b011be8 tbs5980 = 24ac23f3ac12ac6a
every explanation is accepted, thanks.
This is a common known "issue" of Hellobox brand. Not only BISS; PV also shown "wrong" keysgood evening ... I have a Chinese receiver (hellobox) in the biss decoding the key is different from the decoding satellite card tbs 5980, key example: hellobox = d6ef89656b011be8 tbs5980 = 24ac23f3ac12ac6a
every explanation is accepted, thanks.
That is correct. But even with this set of false keys; channels were open. So basicly don't see any problem if Hellobox shown false set of keys.Hellobox does not give you the correct keys in the display. The show you a false set of keys.
one receiver is wrong BISS Encrypted feeds use only one CW Key not two different sets of keys , most likely the Chinese receiver is generating false keys due to the weak bad quality tuner ?
TBS will not decode or generate fake keys which is not a bad thing at all .
And Only the receiver that has the correct Valid BISS Key input will show a picture obviously the TBS i would imagine .
i have same TBS 5980 and unless correct key is input you will get nothing even one wrong/incorrect digit and nothing will decode but it is very accurate all the same .
i have Starsat china box it does Generate a lot of fake CW Keys while trying to Auto Roll and decode BISS Keys especially if signal is weak due to those boxes having really poor quality tuners so perhaps this might be the issue ?