right I have just installed the above driver
after installing the driver mine gave me COM 7 as the virtual port.
connect both cables the usb and the network cable.
then download this version of sunrayflashup http://www.sat-universe.com/showpost.php?p=841002&postcount=22
open flashup and tick use network as well, now click on connect then switch on the box at the back.
it should now connect and you should see sim 2.0.1 on your LED screen on the receiver and NO CA , switch it off then back on and look at the led it should go into serial mode and show an ip.
put that ip into your browser and you should be able to flash it now
after installing the driver mine gave me COM 7 as the virtual port.
connect both cables the usb and the network cable.
then download this version of sunrayflashup http://www.sat-universe.com/showpost.php?p=841002&postcount=22
open flashup and tick use network as well, now click on connect then switch on the box at the back.
it should now connect and you should see sim 2.0.1 on your LED screen on the receiver and NO CA , switch it off then back on and look at the led it should go into serial mode and show an ip.
put that ip into your browser and you should be able to flash it now