BDA Interface For DVB Dream - Last Version

Status
Not open for further replies.
B

baloota

Registered
Messages
2,055
DD often recognizes not every device with an BDA-driver, i decide to write a new one...
This device-driver can handle DVB-S, -C and -T all in one.
Also you can select between the different devices in the Device-Manager.
DiSEqC for use with switches is also implemented - but will not work with every BDA-Driver !!!

It was tested by several DD-users and will work with the following hardware:
- Technisat SkyStar USB plus (... and certainly other cards). DiSEqC works.
- Technisat SkyStar 2 with Beta-BDA-Driver. No DiSEqC (B2C2-Direct will be better...).
- All Terratec-Products (S / C / T). No information about DiSEqC.
- WinTV Nova S. No information about DiSEqC.
- TwinHan 1041 (... and certainly other cards). RAW-DiSEqC works.

-Twinhan Starbox 2.0 with 1.0.3.4 BDA driver - working with Diseqc OK.
 
B

baloota

Registered
Messages
2,055
BDA Interface 1.06 For DVB Dream

It was tested by several DD-users and will work with the following hardware:
- Technisat SkyStar USB plus (... and certainly other cards). DiSEqC works.
- Technisat SkyStar 2 with Beta-BDA-Driver. No DiSEqC (B2C2-Direct will be better...).
- All Terratec-Products (S / C / T). No information about DiSEqC.
- WinTV Nova S. No information about DiSEqC.
- TwinHan 1041 (... and certainly other cards). RAW-DiSEqC works.

-Twinhan Starbox 2.0 with 1.0.3.4 BDA driver - working with Diseqc OK.
 
A

aitchala

VIP
Messages
1,394
BDA Interface 1.07 For Dvb Dream

BDA Interface 1.07​

Code: 
DD often recognizes not every device with an BDA-driver, i decide to write a new one... 
This device-driver can handle DVB-S, -C and -T all in one. 
Also you can select between the different devices in the Device-Manager. 
DiSEqC for use with switches is also implemented - but will not work with every BDA-Driver !!! 

It was tested by several DD-users and will work with the following hardware: 
- Technisat SkyStar USB plus (... and certainly other cards). DiSEqC works. 
- Technisat SkyStar 2 with Beta-BDA-Driver. No DiSEqC (B2C2-Direct will be better...). 
- All Terratec-Products (S / C / T). No information about DiSEqC. 
- WinTV Nova S. No information about DiSEqC. 
- TwinHan 1041 (... and certainly other cards). RAW-DiSEqC works. 

-Twinhan Starbox 2.0 with 1.0.3.4 BDA driver - working with Diseqc OK
 
K

k@lkov

Super VIP
Messages
10,003
BDA Interface v1.1.0 B6 For DVBDream

BDA Interface v1.1.0 B6 For DVBDream
DD often doesn't recognise some Devices that use a BDA driver so i decided to write a new one..

This device-driver can handle DVB-S -C and -T all in one
Also you can select between the different devices in the Device-Manager.
DiSEqC for use with switches is also implemented - but will not work with every BDA-Driver !

It was tested by several DD-users and will work with the following hardware:-

Technisat SkyStar USB plus (... and certainly other cards). DiSEqC works
Technisat SkyStar 2 with Beta-BDA-Driver. No DiSEqC (B2C2-Direct will be better...).
All Terratec-Products (S / C / T). No information about DiSEqC
WinTV Nova S. No information about DiSEqC.
TwinHan 1041 (... and certainly other cards). RAW-DiSEqC works
Twinhan Starbox 2.0 with 1.0.3.4 BDA driver - working with Diseqc Ok
Click to expand...
Thnx to Scanman
 
Status
Not open for further replies.
Top