BBC Satback Package has Launched on Telstar 12 Vantage @ 15°west

J

jud09

Registered
Messages
5
hi guys . i have a autosat on my motorhome which we had bbc/itv on 907/901 but no longer there now so i am waiting for a update to be done on my system to pick up telstar 12 at 15 west . my receiver is a icecrypt which has 15 west pre-programed anyone in the same boat as me out there .jud
 
manic01

manic01

Super VIP
Messages
2,573
jud09 said:
hi guys . i have a autosat on my motorhome which we had bbc/itv on 907/901 but no longer there now so i am waiting for a update to be done on my system to pick up telstar 12 at 15 west . my receiver is a icecrypt which has 15 west pre-programed anyone in the same boat as me out there .jud
Click to expand...
You need to be in good location for beam
 
R

raquero20

Registered
Messages
9
Maniac 01 can you see bbc channels on telstar with a viark 4k?
I have good signal video pid 6601, audio pid 6602, but my firm 1.11 can't open the channel
Thanks
With technomate 5402 hd m3 firm 147p nothing
 
manic01

manic01

Super VIP
Messages
2,573
raquero20 said:
Maniac 01 can you see bbc channels on telstar with a viark 4k?
I have good signal video pid 6601, audio pid 6602, but my firm 1.11 can't open the channel
Thanks
With technomate 5402 hd m3 firm 147p nothing
Click to expand...
Not got viark 4k
TM5402 works fine with correct keys and pids, use the 27w list for 15w if you like
Do you actually have a signal on the 15w BBC channels?
 
P

PechinN

Registered
Messages
11
Hello again. I wouldn't like to be annoying, but reading all the messages that are issued in this forum as in others, in the end I only have disagreement. It's easy, and I hope someone helps me. I have been an installer for many years, since 1987 I have been working on mororized satellite dishes. Well, now at 54 years old, everything is too big for me, in my Region, which is Asturias, I have some English clients who were watching the BBC on Intelstat 27w. When moving to Telsat v12 b they have stopped receiving these channels. They do not have coverage for Astra due to tree problems. I don't want to leave them lying around, and it's already a problem of mine to leave them with service. They live in a rural area and what I want is to charge them the minimum, although I don't think I have dedicated so much time to this, not even to my ex-wife. They have a receiver that worked perfectly with Intelstat 27w, but it doesn't work on Telstar V12. My clients' is an Edision Picco S2 and according to what I have seen in forums and what they have told me, it works with the Edision Piccollino S2. Well, I bought it and we are in the same situation. Please help, not for me but for these clients, I am going to charge them the minimum and I have been lost in the forums for 15 days. Thank you.
 
SATIG

SATIG

Registered
Messages
15
Viark 4K -- OK
Need a big dish...


IMG-4293.jpg
 
Last edited by a moderator:
barney115

barney115

Donating Member
Staff member
Administrator
Messages
24,835
PechinN said:
Hello again. I wouldn't like to be annoying, but reading all the messages that are issued in this forum as in others, in the end I only have disagreement. It's easy, and I hope someone helps me. I have been an installer for many years, since 1987 I have been working on mororized satellite dishes. Well, now at 54 years old, everything is too big for me, in my Region, which is Asturias, I have some English clients who were watching the BBC on Intelstat 27w. When moving to Telsat v12 b they have stopped receiving these channels. They do not have coverage for Astra due to tree problems. I don't want to leave them lying around, and it's already a problem of mine to leave them with service. They live in a rural area and what I want is to charge them the minimum, although I don't think I have dedicated so much time to this, not even to my ex-wife. They have a receiver that worked perfectly with Intelstat 27w, but it doesn't work on Telstar V12. My clients' is an Edision Picco S2 and according to what I have seen in forums and what they have told me, it works with the Edision Piccollino S2. Well, I bought it and we are in the same situation. Please help, not for me but for these clients, I am going to charge them the minimum and I have been lost in the forums for 15 days. Thank you.
Click to expand...
The Two obvious options are
#1 Chainsaw and remove the Tree issues
#2 Take a look on google for kabelio CI CAM Module
move dishes to 13E and Enjoy hassle free BBC's once again
Forget about Edision Piccollino S2 Box is utter Trash and has no CI Module slot

Bonus obvious option #3 get an Android box or Amazon Firestick use BBCiplayer with VPN
lots of free apps also have BBC and more without need for VPN .

There is no obvious option #4 especially if 28E Freesat Channels are out of range .

Good luck : )
 
J

jud09

Registered
Messages
5
manic01 said:
You need to be in good location for beam
Click to expand...
thanks for that but where is the 15 west beam footprint please as i know astra 28 footprint which we start loosing channels after bourdeaux but years ago before the bbc didnt like xpats in spain getting tv without a license we could get everything on our old 80cm dish till they moved the footprint .with 907/901 the wife could watch emmerdale down south spain on our trips but not now .jud
 
manic01

manic01

Super VIP
Messages
2,573
jud09 said:
thanks for that but where is the 15 west beam footprint please as i know astra 28 footprint which we start loosing channels after bourdeaux but years ago before the bbc didnt like xpats in spain getting tv without a license we could get everything on our old 80cm dish till they moved the footprint .with 907/901 the wife could watch emmerdale down south spain on our trips but not now .jud
Click to expand...
For satback on 15w the beam is, North Sea Beam
 
manic01

manic01

Super VIP
Messages
2,573
PechinN said:
Hello again. I wouldn't like to be annoying, but reading all the messages that are issued in this forum as in others, in the end I only have disagreement. It's easy, and I hope someone helps me. I have been an installer for many years, since 1987 I have been working on mororized satellite dishes. Well, now at 54 years old, everything is too big for me, in my Region, which is Asturias, I have some English clients who were watching the BBC on Intelstat 27w. When moving to Telsat v12 b they have stopped receiving these channels. They do not have coverage for Astra due to tree problems. I don't want to leave them lying around, and it's already a problem of mine to leave them with service. They live in a rural area and what I want is to charge them the minimum, although I don't think I have dedicated so much time to this, not even to my ex-wife. They have a receiver that worked perfectly with Intelstat 27w, but it doesn't work on Telstar V12. My clients' is an Edision Picco S2 and according to what I have seen in forums and what they have told me, it works with the Edision Piccollino S2. Well, I bought it and we are in the same situation. Please help, not for me but for these clients, I am going to charge them the minimum and I have been lost in the forums for 15 days. Thank you.
Click to expand...
If the signal is achievable then a cheap used Technomate 5402 any version will work just fine for 15w.
 
J

jud09

Registered
Messages
5
been to the motorhome on storage to today updated 15 west telstar with USB stick uploaded ok replacing 907 . i have a icecrypt 1600SE a i had to change the parameters 11043 v 44103 ended up with about downloaded all the usual BBC sat-back channels BUT just a blank screen & no sound any ideas please when next in the van will take photos if that helps me . thanks .jud
 
manic01

manic01

Super VIP
Messages
2,573
jud09 said:
been to the motorhome on storage to today updated 15 west telstar with USB stick uploaded ok replacing 907 . i have a icecrypt 1600SE a i had to change the parameters 11043 v 44103 ended up with about downloaded all the usual BBC sat-back channels BUT just a blank screen & no sound any ideas please when next in the van will take photos if that helps me . thanks .jud
Click to expand...
Check pids are correct, and he's is set up for each channel ok
 
J

jud09

Registered
Messages
5
manic01 said:
Check pids are correct, and he's is set up for each channel ok
Click to expand...
not sure what pids are me being thick i think the best i can do is take a photo of the tv screen with where i am up to i know they are there because the names of the channels highlight in blue on the screen so something is not right thanks again
 
manic01

manic01

Super VIP
Messages
2,573
jud09 said:
not sure what pids are me being thick i think the best i can do is take a photo of the tv screen with where i am up to i know they are there because the names of the channels highlight in blue on the screen so something is not right thanks again
Click to expand...
Just use your 27w list
 
You must log in or register to reply here.
Top