15°W FIGHT NETWORK HD 12707 H 3700 - Request
- Thread starter cpr43
- Start date
lordgothic
Registered
- Messages
- 136
hi... since some days fight network not have audio... any solution?
fiji
Member
- Messages
- 1,095
Remove channel & scan again tp.
Can you send me a stream recording, I would like to have a go at it.
lordgothic
Registered
- Messages
- 136
still the same
maximus333
Registered
- Messages
- 29
audio codec - AC3
lordgothic
Registered
- Messages
- 136
yes ac3 (1031 on dreamboxedit) but not sound.. i have edision os mio 4k... maybe need another box?
or its necesary change lamebd?
thanks
lordgothic
Registered
- Messages
- 136
lordgothic
Registered
- Messages
- 136
krzyś;2037045505 said:Hello.
I confirm that I have no voice on this program on VU + Zero 4K
me too any solution?
on my edision os mio not sound E2
on my edision primo enigma1 with sound
Post a log of oscam at tuning the channel.
Something might be off when picking up he audio pid.
In any case ,try this :
See if the audio passthrough works,in TV,use the digital audio out and see if there is sound there.
Open webif,try to stream the channel to pc using vlc,check if audio is ok.
How many audio pids it has?
In dreamboxedit,force the audio pid to be used,set the option K to use this pid permanently.
Try older oscam version,see if they work.
Something might be off when picking up he audio pid.
In any case ,try this :
See if the audio passthrough works,in TV,use the digital audio out and see if there is sound there.
Open webif,try to stream the channel to pc using vlc,check if audio is ok.
How many audio pids it has?
In dreamboxedit,force the audio pid to be used,set the option K to use this pid permanently.
Try older oscam version,see if they work.
Your box should have an audio output settings section in the setup/menu.
krzyś1
Senior Member
- Messages
- 1,075
So that's definitely the fault of the current oscam because I uploaded the old example oscam 11505 voice on Fight Network HD is and if I upload the current 11560 latest no voice
By using VLC to transfer the program to the computer I also have no voice.
In Dreamboxedit, forcing the use of pid audio also doesn't do anything.
It only helps to download the older version of oscama.
The only question now is from which version there is no audio on this program.
lordgothic
Registered
- Messages
- 136
i detected that not sound since end september about oscam 11546
so before must runs
thaank to all poeople at this great forum
today ill try to install 11359 oscam
so before must runs
thaank to all poeople at this great forum
today ill try to install 11359 oscam
Does enigma2 detect these audio tracks? Are these audio tracks listed in the audioselection screen (yellow button)?
Proper signaling of ac3 audio in ATSC transmitions requires stream_type set to 0x81 and an ac3_descriptor (with tag 0x81) present as well. But the descriptor seems to be missing from these tracks. So, for starters, this channel does not follow the ATSC standard.
Indeed, I made a change in oscam recently (rev. 11544) to check for the presence of the ac3_descriptor. This wasn't done before. I can revert this. Hopefully, there won't be any problems with other channels.
Proper signaling of ac3 audio in ATSC transmitions requires stream_type set to 0x81 and an ac3_descriptor (with tag 0x81) present as well. But the descriptor seems to be missing from these tracks. So, for starters, this channel does not follow the ATSC standard.
Indeed, I made a change in oscam recently (rev. 11544) to check for the presence of the ac3_descriptor. This wasn't done before. I can revert this. Hopefully, there won't be any problems with other channels.