1.07 new update

[doctor no]

Hi
there is 1.07 firmware update:

New update Qviart-DUAL-4K_Firm-Android9-PT-v1.07-[20231027]

files: system.img + vendor.img

Its not clear what this update for.

BR

 

[kegnkiwi]

Weird but we are already on 1.07

 

[Ferret]

Hi
there is 1.07 firmware update:

New update Qviart-DUAL-4K_Firm-Android9-PT-v1.07-[20231027]

files: system.img + vendor.img

Its not clear what this update for.

BR

This is what the update is for, its a very good update.

Bugs fixed and improvements:
1. Randomly BOOT LOOP fixed
2. PVR function and play records files in the box working well.
3. Scan freezes while doing Normal, Blind or Multiscan
4. Motor scan issues fixed
5. Scan with Unicable issues fixed
6. Channels missed when scan fixed.
and more small bugs fixed

- 2 small bugs that will be fixed in the following version:

1. When play a channel and put the box on Standby, when you turn on and make zapping the infobar will show always the info of the first channel opened after the standby, it doesn't happen in POWER OFF mode.
2. Graphic error in the ENTER CURRENT PIN screen in the Locker and Parental menus, it is only a grpahic error, if you input the Password it will unlocked the menu.

 

[doctor no]

This is what the update is for, its a very good update.

Bugs fixed and improvements:
1. Randomly BOOT LOOP fixed
2. PVR function and play records files in the box working well.
3. Scan freezes while doing Normal, Blind or Multiscan
4. Motor scan issues fixed
5. Scan with Unicable issues fixed
6. Channels missed when scan fixed.
and more small bugs fixed

- 2 small bugs that will be fixed in the following version:

1. When play a channel and put the box on Standby, when you turn on and make zapping the infobar will show always the info of the first channel opened after the standby, it doesn't happen in POWER OFF mode.
2. Graphic error in the ENTER CURRENT PIN screen in the Locker and Parental menus, it is only a grpahic error, if you input the Password it will unlocked the menu.

Hi
The file is copressed and after extractions there are many files and the dico did not detect any of them .its not a bin. file
how to use this update?

BR.

 

[Ferret]

Hi
The file is copressed and after extractions there are many files and the dico did not detect any of them .its not a bin. file
how to use this update?

BR.

Use from here it is a bin file ive checked it.

DOWNLOAD

 

[doctor no]

Weird but we are already on 1.07

This update was on forokeys forum.

 

[cokeaddict]

This update was on forokeys forum.

It is for those that need to try and recover a box using hitool, if it's not responding to anything.

 

[kegnkiwi]

It is for those that need to try and recover a box using hitool, if it's not responding to anything.

That's good to know.

 

[kegnkiwi]

Hitool nedir hocam

It's for recovering the box when no other options work.

 

[Android.SAT.95]

Do you have any news of when the new firmware will be released?

 

[Ferret]

Do you have any news of when the new firmware will be released?

No time frame on it.

 

[Android.SAT.95]

Is there any news regarding the new fw?

 

[Ferret]

Is there any news regarding the new fw?

Not that ive heard.

Could i ask why you ask ? What is it your wanting fixed or is it just the upgrade to 1.44 ?

 

[Android.SAT.95]

Not that ive heard.

Could i ask why you ask ? What is it your wanting fixed or is it just the upgrade to 1.44 ?

Fix EPG Pro which does not work properly
CHMax implementation
Update 1.44

 

[Atique leghari]

Please someone guide how to load exrootfs-dual-openspa8.3-egami10.3-openatv7.3-pure6.5 file

 

[kegnkiwi]

Please someone guide how to load exrootfs-dual-openspa8.3-egami10.3-openatv7.3-pure6.5 file

Start off by choosing just one image as there are 4 listed above. Hopefully, you have atv in slot one. Download the image you want and choose the mmc version, not the restore version. Leave it zipped and put it on a usb stick. Stick the usb stick in the front usb slot on the receiver. On the remote push blue button and select software, tab across the the right. I think it 2nd one down. Install by flash and then within that menu push the green button to expand. When it expands that option the image you have on that stick will be available. Select the file on the stick and proceed. It will then ask what slot you wish to flash the file to. Select 2 3 or 4. then choose a clean install and off you go. After is finished just boot into another slot from the Stanby menu.

 

[Atique leghari]

Start off by choosing just one image as there are 4 listed above. Hopefully, you have atv in slot one. Download the image you want and choose the mmc version, not the restore version. Leave it zipped and put it on a usb stick. Stick the usb stick in the front usb slot on the receiver. On the remote push blue button and select software, tab across the the right. I think it 2nd one down. Install by flash and then within that menu push the green button to expand. When it expands that option the image you have on that stick will be available. Select the file on the stick and proceed. It will then ask what slot you wish to flash the file to. Select 2 3 or 4. then choose a clean install and off you go. After is finished just boot into another slot from the Stanby menu.

Thanks brother for your response I want to ask I have a file name of (exrootfs). How to load this file on receiver

 

[kegnkiwi]

Thanks brother for your response I want to ask I have a file name of (exrootfs). . How to load this file on receiver

Why have you got a file named " (exrootfs)." ? I have seen this on the receiver screen when it is flashing an image but i have never tried loading a file called that direct to the receiver. What are you trying to achieve.

 

[Atique leghari]

Please check image

Why have you got a file named " (exrootfs)." ? I have seen this on the receiver screen when it is flashing an image but i have never tried loading a file called that direct to the receiver. What are you trying to achieve.

Please read and explain
The multi-launcher userdata file is passed to the device using the Hitool loader new 2024 : exrootfs.ext4 file https:// www.mediafire.com/file/h3444cazl9holnp/exrootfs-dual-openspa8.3-egami10.3-openatv7.3-pure6.5.rar/fileTheexrootfs.ext4file contains 4 enigma2 images openspa 8.3 egami 10.3 openatv 7.3 pure 6.5 and it is passed to the Qviart dual device with Hitool loader new 2024 : Full-Dump-Qviart-DUAL-4K_Android9-PT-v1.07+E2-[20231229]-web-TBs-tn file

 

[kegnkiwi]

Please check image

Please read and explain
The multi-launcher userdata file is passed to the device using the Hitool loader new 2024 : exrootfs.ext4 file https:// www.mediafire.com/file/h3444cazl9holnp/exrootfs-dual-openspa8.3-egami10.3-openatv7.3-pure6.5.rar/fileTheexrootfs.ext4file contains 4 enigma2 images openspa 8.3 egami 10.3 openatv 7.3 pure 6.5 and it is passed to the Qviart dual device with Hitool loader new 2024 : Full-Dump-Qviart-DUAL-4K_Android9-PT-v1.07+E2-[20231229]-web-TBs-tn file

Sorry i've never played with the hitool loader. It looks complicated and not something i need to have a go at yet. I saw something released a week or so ago on another forum about loading different launchers ect but it was in arabic. Maybe you can work out how to do it and post back here. I can think of only one person who might have knowledge. @cokeaddict have you had a play about with these new files yet?