Dear mR Ferret
Tons of thanks to u. i followed u and got rid of this problem. main problem was my serial cable was dead.
so got new cable all well
thak u so much
hi all
i have dreambox 800HDse clone sim2.1 and i didn't arrive to flash it again. The facade just display me " stop" "dhcp" but didn't show an IP. Then i tried to flash with the sunray-flashup sim2&4 et it's wrote me " upload complete;waiting for acknowledge"
please help me
I f*****g love you!!!!Try this method mate with the files from the link it will force the flash button to bacome active.
OK mate
Try this hacked DreamUP for clones
http://www.sat-universe.com/showthread.php?t=141826
To use
1. Connect you null cable to the 800 with no power supply connected.
2. Unpack the 2nd stage pack and go in to the folder named different method.
3. Start DreamUp and when it finds you 800 apply the power to the 800, ignore the error message you getting.
4. Now execute the enforcer.exe and press on enable.
You should now see the flash button and be able to select your image and flash it.
Ferret
Hi i have the same problem with ERR01 NO CA FOUND, after an accidental update of an oozoon image.
My issue is that my rs232 port on my dm800 clone was and is dead from the day i got it, so i guess i cannot repair the err01... with that.
Does anyone know if i can fix it through ethernet or jtag or usb or any other way except the rs232?
Thanks in advance
I dont thinks you can mate.
I would look into trying to repair the rs232 port take the mobo out of the 800 and look for dry joints etc
Man i have had this problem once 6 months ago and managed to get to STOP and ip, with unplugging and replugging the power multiple times while holding the stand by button on the screen. Then i could flash it through the browser.
I cant seem to remember the extact way i did it though. :mecry:
Hi i have the same problem with ERR01 NO CA FOUND, after an accidental update of an oozoon image.
My issue is that my rs232 port on my dm800 clone was and is dead from the day i got it, so i guess i cannot repair the err01... with that.
Does anyone know if i can fix it through ethernet or jtag or usb or any other way except the rs232?
Thanks in advance
Thats the method for flashing via browser mate as you say nothing to do with the rs232 port which you use a null modem cable on.
without the rs232 port working you might aswell throw it in the bin,because thats the only way you are going to fix it,are you sure you have a null modem cable and not a serial cable,a serial cable will not work it must be a null modem cable.
i would take ferrets advise and try fix the port.