Hi
mknod lines go into /var/config/rc.modules
Line should be there already, just remove the # comment from the lines mknod and chmod.
Keep in mind, you also need the usb-to-serial adapter. It has usb-connector in one end and a rs232-connector at the other, like this one
View attachment 146938
Thank you tetra for your reply.
My rc.modules has now been edited to this:
#!/bin/sh
MODDIR=/lib/modules
echo "init phoenix"
mknod /dev/ttyUSB0 c 188 0
chmod 666 /dev/ttyUSB0
mknod /dev/ttyUSB1 c 188 1
chmod 666 /dev/ttyUSB1
insmod /lib/modules/usbserial.ko
insmod /lib/modules/pl2303.ko
ls /dev/ | grep ttyUSB*
dmesg
echo "init internal slot card"
/var/bin/sci-ng.sh restart
echo "init cifs"
insmod $MODDIR/cifs.ko
#echo "init ntfs"
# insmod $MODDIR/ntfs.ko
Is this correct?
This card reader always worked with NLB images so I know its not the card reader. Hope you can help me a bit more. Thanks Montyboy.
My newcs.xml looks like this:
<newCSconfig>
<readers name="Card Readers">
<device>
<name>Phoenix1</name>
<type>Phoenix</type>
<node>/dev/ttyUSB0</node>
<mhz>357</mhz>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<PTShandshake>No</PTShandshake>
<crypto-special<no>/crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10010</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
<device>
<name>Phoenix2</name>
<type>Phoenix</type>
<node>/dev/ttyUSB1</node>
<mhz>357</mhz>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<PTShandshake>No</PTShandshake>
<crypto-special<no>/crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10011</newcamd_port>
<Seca-PPV>no</Seca-PPV>
<autosid>Yes</autosid>
<priority>round</priority>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
<device>
<name>Front</name>
<type>Phoenix</type>
<node>/dev/ttyUSB0</node>
<parity>even</parity>
<!-- reset normal dla phoenix, inverse dla season -->
<reset>normal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxkey></boxkey>
<rsa></rsa>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10002</newcamd_port>
<autosid>yes</autosid>
<!-- <priority>hard</priority> -->
<priority>round</priority>
</device>
</readers>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<httpd>
<server>
<port>8081</port>
<enabled>yes</enabled>
</server>
<user>
<name>root</name>
<password>pktteam</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile></userfile>
<!-- ipbox -->
<user>
<name>pkt</name>
<password>pkt</password>
<au>on</au>
<allow>Front</allow>
</user>
<!-- tu wpisujemy peerow ponizej przyklad <user> </user> -->
<user>
<name>peer</name>
<password>peer</password>
<au>on</au>
<allow>Front</allow>
</user>
</newcamdserver>
</newCSconfig>