Sure, here they are: https://mega.nz/#!4ZEE2KQY!5io4trSIhrVggfyDF5TWNEEXPvW9xKVBlVJyT2Q7H0c
Method of Opening PowerVu Channels in Enigma2 Using Oscam
- Thread starter Ghouri
- Start date
To make it clear for me:
All the files in the link above will go inside the path:
\etc\tuxbox\config\oscam
right?
dm800se clone backup image with pre installed all files and settings plz..i m not understanding why any one of member is not making backup of image to help members like me who r not understanding this whole process of powervu working on enigma2.this is a very big and informative forum and we gain a lot of info from this place..i hope any member will think about it.
DeepImpact
Registered
- Messages
- 9
Hi @DeepImpact and thanks for the kind words. In fact releases are not mine, just the build binaries are, so all the credits are going to the creators of OSCAM, oscam-emu, and all the kind guys contributing the patches that I am using to build the binaries. It is just a few lines that I am typing in order to compile the binaries
I have just checked once again and the PowerVU emu seems to be working fine with my xp1000 box. Could you please, try rebooting your receiver after replacing the binary, just in case something was cached. All the changes that I made between previous and this build were to add debug off in config.sh and to inject the signal catcher patch. If the build does not work again after rebooting, could you kindly use the previous binary 10933.
Thanks.
thanks... already tried restart cam, reboot STB but still the same only power vu channel not working.
I will try your others version on #419 n see how... hopefully there's a version work for me again for power vu channel, or else I will stick to ur previous release
btw, all my config are in \etc\tuxbox\config but not \etc\tuxbox\config\oscam as you mentioned in ur post, are this possible cause the power vu channel not clear ? thanks again for ur great work... appreciate it !!
Last edited:
In my view, since this technique involves creating of iptv channel lists (which differ from region to region) so a backup created by a member living in Europe or America will not be useful for another member living in Asia and watching totally different satellites.
However, I will certainly create a backup image for Dreambox DM800HD PVR as soon as I get back to my system, for the benefit of other users living in my country and using same receiver. I will also try to provide a channel list backup separately (for Asiasat 7 only though). Rest, you may try the binaries and config files shared by satmafia in his recent posts. I hope these will certainly work for you.
I would like to investigate where the problems with using my compiled 10936 version come, so I've built multiple versions of the same binary and I would like to invite @cbr900 and @AboMu3ath to test them one by one and write back which one (if any) opens PowerVU channels well and which one does not work at all. The purpose of this investigation is to find out if it was because of the 10936 build or because of me adding a compilation parameter or patch which for any reason is not compatible with your set-top-boxes. This will help me in future to avoid broken binaries after version bumps.
Thank you in advance for participating in this beta test
Here is the archive which contains oscam binaries in their self-explaining folder names:
https://mega.nz/#!UQtFUBZb!ePWQHuDMaBlARUdEtSMBjqyKSl5XYbPUJi0GRzv7kjY
Thanks for letting me test
My setup:
-VU+UNO
-Openvix Hades 0.18
What I have done:
I put all the config files in \etc\tuxbox\config\oscam
Then:
I put the oscam file in \usr\softcams
Only the oscam inside with-pvu-ecm-fix folder works with stuttering.
Only, Sport HD channel works without stuttering.
The other oscam files did not clear any afn channel. (This the only p vu freq I can receive)
I did not adjust any parameters in the config files/webif
I hope this helps
Last edited:
EXPERIMENTAL files for Test
http://www.filedropper.com/testoscam-powervuoe16oe20pli4
Tests along with the files or only the bin
http://www.filedropper.com/testoscam-powervuoe16oe20pli4
Tests along with the files or only the bin
Last edited:
ur opinion is ok but most of the members are talking about afn package on 9 east.which is easily receivable in our region..so i m waiting for a possitive response from dear fellows.
Thank you for the reply, that would be great. The receiver local IP address is 192.168.1.43 (I have sent you also a pm).
Thank you very much !
Thank you for testing the binaries! It is the signal catcher patch that seems to break things for your receiver as far as I can see, though it works okay with mine.
How about the freezing image it should've been fixed with the ECM fix applied to all test files, but it is interesting that it is not the case with you receiver. Could you, please test the same working binary with openpli if available for your stb? There is an Include ECM in http streams option in System->Customize option helpful for watching PVU channels using streaming.
Thanks.
Last edited:
Sure, I will create an ipk file to ease you installing it on pli. I am have PVU working on pli.
Here it is: https://mega.nz/#!lE9AkYAR!wM2GBALGuXWFGWFeWqaySoal5rzHqcZmeFBfQoww6MM
it is an ipk file you might use to install package via the Plugins » Software management » Install local extension » Memory, but before that you will need to upload it via ftp to /tmp folder.
it is an ipk file you might use to install package via the Plugins » Software management » Install local extension » Memory, but before that you will need to upload it via ftp to /tmp folder.
I have a new version which should fix the small glitches. I also changed the compiler options, so it will only include the multi-client forking with OSEmu and not when built with oscam. I added some optimizations to ffdecsa which requires some other files. And I also made some changes to the makefile to optimize even further. I have only tested on 10888, so it needs to be tested with your latest 10937 fixed patch. I don't have time now, but maybe later tonight I will create the new patch and upload after I can test it.
Does this patch contain your latest changes? http://www.streamboard.tv/wbb2/thread.php?postid=549986#post549986
I have installed OpenPLi-4.0-beta-vuuno-20150809_usb.zip image in my vu+uno and installed also the ipk file...
oscam included did not work
Will check later with other versions...