Vu+Uno CAMS ( hardware not softcams )

Pheonix

Senior Member
Messages
399
I saw a thread on another forum detailing a problem with hardware cams and the Vu+Duo so i decided to test my cams on the Uno and post the results here.

NB all cams have been tested and are working in my DM7020

===============

ORIGINAL CAMS

seca aston black rev 1.03 NOT DETECTED
viaccess black rev 1 NOT DETECTED
irdeto FULLY WORKING
conax ( technicrypt ) FULLY WORKING


magic / special cams

dragon module rev 2.06 with loader card ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
dragon module rev 3.02 ( firecrypt ) = damaged body ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
diablo (1) light rev 2.2 upgraded to 2.3 via software patch ( underworld 2.14 ) FULLY WORKING
diablo (1) light rev 2.2 ( not updated still 2.2 ) ( underworld 2.14 ) FULLY WORKING
icecrypt blue rev 2.01 NOT DETECTED
zeta red rev 2.01 NOT DETECTED
matrix reloaded ( mr 1.082 ) FULLY WORKING
matrix revolutions ( mrv 2.24 ) FULLY WORKING

i should have a Viaccess red cam ( early generation ) and a seca aston v 1.04 coming soon, i will test those and update this thread.
 

Pheonix

Senior Member
Messages
399
Giving credit to phoenix for this would be good.. As this is his post.. !!!!!!!

LMAO mate, i am pheonix and 00DUDE and you also know me as DUDE from DBUK. i get about and have many aliases. although i might ask the admins if they could change my name to PHEONIX here to go with most of the other forums i'm on.
 

Pheonix

Senior Member
Messages
399
some updates

ORIGINAL

seca aston black rev 1.03 NOT DETECTED
viaccess black rev 1 NOT DETECTED
viaccess red rev 1 v484 (software ver 1.0.484 / application ver 1.08.003 ) FULLY WORKING
irdeto 2 ( loader ver 3.1 / softcell ver 2.26D ) FULLY WORKING
conax ( technicrypt - technisat cx ) software ver 26.1.5.0.6 interface ver 0x40 FULLY WORKING


magic / special cams

dragon module rev 2.06 with loader card ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
dragon module rev 3.02 ( firecrypt ) = damaged body ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
diablo (1) light rev 2.2 upgraded to 2.3 via software patch ( underworld 2.14 ) FULLY WORKING
diablo (1) light rev 2.2 ( not updated still 2.2 ) ( underworld 2.14 ) FULLY WORKING
icecrypt blue rev 2.01 NOT DETECTED
zeta orange rev 2.01 NOT DETECTED
matrix reloaded ( mr 1.082 ) HW 1.5 / loader 1.0 FULLY WORKING
matrix revolutions ( mrv 2.24 ) HW 1.5 / loader 1.0 FULLY WORKING
 

Pheonix

Senior Member
Messages
399
viaccess red rev 1 v484 (software ver 1.0.484 / application ver 1.08.003 ) FULLY WORKING
 

Pheonix

Senior Member
Messages
399
diablo 2 light ( diablo 1 rev 2.3 light updated to diablo 2 light via software patch ) ( Ipnosys034 ) FULLY WORKING
 

Pheonix

Senior Member
Messages
399
newest updated list of tested cams.
====

ORIGINAL

seca aston black rev 1.03 NOT DETECTED confirmed with two cams of the same revision
seca aston black rev 1.04 FULLY WORKING confirmed with two cams of the same revision
seca aston black rev 1.05 FULLY WORKING
seca aston black Hardware revision 1.2 software v 1.05 FULLY WORKING
SECA ( mediaguard branded cam ) NOT DETECTED
viaccess black rev 1 NOT DETECTED
viaccess red rev 1 v484 (software ver 1.0.484 / application ver 1.08.003 ) FULLY WORKING
Irdeto 1 freecam ( softcell ver 2.06 ) FULLY WORKING
Irdeto 1 freecam ( FreeCAM 2-019 ) FULLY WORKING
irdeto 2 freecam rev 1.1 ( irdeto common interface ver 01.06 ) P/N 901275 FULLY WORKING
irdeto 2 ( consumer / purple ) (softcell 2.21A / application ver 1.11.003) FULLY WORKING
irdeto 2 ( purple / white ) ( loader ver 3.1 / softcell ver 2.26D ) FULLY WORKING
conax ( technicrypt - technisat cx ) software ver 26.1.5.0.6 interface ver 0x40 FULLY WORKING
conax Telnor CAM-3.03 NOT DETECTED
conax Telnor CAM-2.01 NOT DETECTED
cryptoworks ( phillips ) NOT DETECTED
nagravision SCM v1.0 NOT DETECTED

magic / special cams

dragon module rev 2.06 with loader card ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
dragon module rev 3.02 ( firecrypt ) = damaged body ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
T-rex twin module ver 1.0 rev 4.1 ( firecrypt ) FULLY WORKING
T-rex super module rev 4.6 ( firecrypt ) ( PREDASAUR 2.40 ) FULLY WORKING
diablo (1) light rev 2.2 upgraded to 2.3 via software patch ( underworld 2.14 ) FULLY WORKING
diablo (1) rev 2.2 ( not updated still 2.2 ) ( underworld 2.14 ) FULLY WORKING
diablo 2 light ( diablo 1 rev 2.3 light updated to diablo 2 light via software patch ) ( Ipnosys034 ) FULLY WORKING
Icecrypt blue rev 2.01 ( joker cam 1.17 KAMILZ ) FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
Icecrypt blue rev 2.01 ( joker cam 1.18 KAMILZ ) FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
zeta orange rev 2.01 NOT DETECTED
zeta blue rev 2.01 P/N 1250/2002 FULLY WORKING
matrix reloaded ( mr 1.082 ) HW 1.5 / loader 1.0 FULLY WORKING
matrix revolutions ( mrv 2.24 ) HW 1.5 / loader 1.0 FULLY WORKING
matrix reborn ( neo 4.11 ) HW 1.5 / loader 1.0 FULLY WORKING
Magic module rev 1.04 P/N 8105/2002 FULLY WORKING
Magic module rev 1.05 P/N 8106/2003 ( neo 4.11 ) FULLY WORKING
Free-x tv rev 2.01 PRD-CAM0-0102 P/N 1250/2002 ( icecrypt black clone ) joker 1.17 kamilz FULLY WORKING AFTER 18.01.2012 DRIVERS UPDATE
AXAS cam model 44Y2 ver 1.55-4 H/W 1.5 S/W Mrb 3.07 loader 1.0 FULLY WORKING
AXAS cam II ( icecrypt black clone ) model 44Y2 ver 1.55-4 NOT DETECTED



I will add to and update this thread as and when i obtain new cams to test. NB all cams here have been tested by my self, none of this information has been taken from any other source.
 

neWbiZ

Registered
Messages
21
just a question

Hi
I'm a little bit stupid and a newbie ....
I'm using BH 1.7.2 with cccam 2.1 4 I have an Canal digital card ,conax, what should I use your cam for ?
You may send me an PM
THX
 
Top