guli
Registered
- Messages
- 375
hi guys i am trying to setup a cccam server in oscam . first i need to know , do i need to have a cccam installed at all . i want to be able to give C lines after . at the minute i have oscam + cccam running smoothly . just wanted to try & see if this works . if its better i might stay with it . i have tried with a c line with the following configs , but cannot connect to my peer . i am running dvbapi with cccam stopped when i try with these configs . please tell me where i am going wrong . in the logs i can see that the user is ok but the reader is not .
oscam.conf
[global]
logfile = stdout
cachedelay = 120
nice = -1
saveinithistory = 1
[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0
#[cs357x]
#port = xxxxx diff from newcamd
#serverip = 192.168.x.xxx
[cccam]
port = xxxxx diff from newcamd/[cs357x]
reshare = 2
ignorereshare = 0
version = 2.1.3
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 2
[dvbapi]
enabled = 1
au = 1
boxtype = xxxxx
user = xxxxx
pmt_mode = 0
[webif]
httpport = 17001
httpuser = root
httppwd = password
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.100-192.168.2.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpjsicons = 1
oscam.server
[reader]
label = sky
enable = 1
protocol = internal
device = /dev/sci0
showcls = 0
services =
caid = 0963
group = 1
detect = cd
cardmhz = 600
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
blockemm-s = 0
blockemm-u = 0
fix9993 = 0
lb_weight = 101
C: myserver.dyndns.tv 12000 user pass { 0:0:2 }
the C line is not in the config file .
[reader]
label = nick name of peer
enable = 1
protocol = cccam
device = myserver.dyndns.tv, 12000
user = user
password = pass
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccwantemu = 0
ccckeepalive = 1
audisabled = 1
oscam.user
[account]
user= username i gave in my C line
pwd= pass i gave in my C line
group=1
cccmaxhops=2
cccreshare=2
oscam.conf
[global]
logfile = stdout
cachedelay = 120
nice = -1
saveinithistory = 1
[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0
#[cs357x]
#port = xxxxx diff from newcamd
#serverip = 192.168.x.xxx
[cccam]
port = xxxxx diff from newcamd/[cs357x]
reshare = 2
ignorereshare = 0
version = 2.1.3
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 2
[dvbapi]
enabled = 1
au = 1
boxtype = xxxxx
user = xxxxx
pmt_mode = 0
[webif]
httpport = 17001
httpuser = root
httppwd = password
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.100-192.168.2.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpjsicons = 1
oscam.server
[reader]
label = sky
enable = 1
protocol = internal
device = /dev/sci0
showcls = 0
services =
caid = 0963
group = 1
detect = cd
cardmhz = 600
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
blockemm-s = 0
blockemm-u = 0
fix9993 = 0
lb_weight = 101
C: myserver.dyndns.tv 12000 user pass { 0:0:2 }
the C line is not in the config file .
[reader]
label = nick name of peer
enable = 1
protocol = cccam
device = myserver.dyndns.tv, 12000
user = user
password = pass
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
cccversion = 2.1.3
cccwantemu = 0
ccckeepalive = 1
audisabled = 1
oscam.user
[account]
user= username i gave in my C line
pwd= pass i gave in my C line
group=1
cccmaxhops=2
cccreshare=2