Manual update Mvision HD 300 & Combo
VERY IMPORTANT INDICATION OF MANUFACTURER:
Upgrade first to the 4.45 version with the file 'HD300E_conv.UAD' and then to 4.45 with the file 'HD300E_HSMD_0922_0445.UAD'.
If you already have a version higher than 4.43 no need to put the file 'HD300E_conv.UAD'.
LOADING THE SOFTWARE FOR USB
Connect the decoder with SCART or HDMI by making the TV to view certain sections of the tasks in
our TV.
Select on the remote control:
Menu accessories, usb: in this screen, the decoder will read the flash drive or hard drive. In option
select the file to load (loqsea.UAD) and give the OK on the remote, then on the screen we
display a dialog titled "SELECT UPGRADE MODE" with the following options:
S / W UPGRADE
S / W + ALL DATA UPGRADE
CANCEL
We will choose the first option "S / W UPGRADE" and accept the command ok. In the new screen will appear a
new dialog box in which by some bars will indicate the state of reading the usb, and the
writing in the flash. This process takes about 30 seconds and the deco restarts. The second option varies
bootloader and as in previous models of it is necessary only occasionally change.
LOAD channel list by USB:
The process is as follows:
Menu accessories, usb: On this screen the decoder will read the flash drive or hard disk in the Select
the file to load (loqsea.UDB) and give the OK on the remote, then the screen will appear a dialog box that says "Do you want to download a new database?
We will give the okay from the command, the display will show
the status of the update and then re-initialize the system. We have introduced our list of channels
Gracias a POTITI
VERY IMPORTANT INDICATION OF MANUFACTURER:
Upgrade first to the 4.45 version with the file 'HD300E_conv.UAD' and then to 4.45 with the file 'HD300E_HSMD_0922_0445.UAD'.
If you already have a version higher than 4.43 no need to put the file 'HD300E_conv.UAD'.
LOADING THE SOFTWARE FOR USB
Connect the decoder with SCART or HDMI by making the TV to view certain sections of the tasks in
our TV.
Select on the remote control:
Menu accessories, usb: in this screen, the decoder will read the flash drive or hard drive. In option
select the file to load (loqsea.UAD) and give the OK on the remote, then on the screen we
display a dialog titled "SELECT UPGRADE MODE" with the following options:
S / W UPGRADE
S / W + ALL DATA UPGRADE
CANCEL
We will choose the first option "S / W UPGRADE" and accept the command ok. In the new screen will appear a
new dialog box in which by some bars will indicate the state of reading the usb, and the
writing in the flash. This process takes about 30 seconds and the deco restarts. The second option varies
bootloader and as in previous models of it is necessary only occasionally change.
LOAD channel list by USB:
The process is as follows:
Menu accessories, usb: On this screen the decoder will read the flash drive or hard disk in the Select
the file to load (loqsea.UDB) and give the OK on the remote, then the screen will appear a dialog box that says "Do you want to download a new database?
We will give the okay from the command, the display will show
the status of the update and then re-initialize the system. We have introduced our list of channels
Gracias a POTITI