Urgent problem in vu+solo???

[hackeroon]

i have a vu+solo with blackhole image after 15 days watching no signal all channels and free to air i flash it from the begining and i put 5 different images and no signal i am worry that is a tuner problem can any one help me please i appriciate thanks

 

[Ferret]

Id check out your lnb and dish alignment before condemning the tuner.

Maybe try another receiver if you have one on that dish setup.

 

[sam_]

I've had exactly the same issue. No pb on my installation. Change ur image and before ur cfe if needed.

Regards.

 

[hackeroon]

i change it 5 times vti blackhole open pli and all with no signal
and thanks for your fast reply

 

[hackeroon]

my satellite dish with another recever it works all channles worked

 

[hackeroon]

yes i update the cfe_solo and than i put the image but no signal in all channels

 

[sam_]

yes i update the cfe_solo and than i put the image but no signal in all channels

Did u try the BlackHole image 1.7.3 with updated cfe ? This change resolved my issue.

Check at the same time your installation.

Regards

 

[hackeroon]

i went to my technician and we put fixed dish it came the signal in horizontal channels only the problem is no voltage in lmb and the motor from the receiver so he is going to fix the voltage in the receiver and thanks so much for all help thanks for now

 

[sgate]

i had that and it was a tuner problem

 

[CYRILL22]

Hi Dish is not set up correctly !