hello can you please help me I have tried to upgrade my avatar 2 with files from download OpenPli_OE2.0_211_epl3_git_03_01_13_GI_Avatar_Ritx_Mod Back up.
but cant upgrade from usb so tried boot as below.
Upgrade Step:
1. Make sure [C:/engima2] is exist, if not, please create this folder.
2. copy [uImage] and [e2jffs2.img] to [C:/engima2]
3. Connect USB stick to STB
4. Keep Pressing [OK] Button in Front Panel, then power on STB.
5. After 5 seconds, you will see [Forc] in LED, release [OK] button and press
but cant upgrade from usb so tried boot as below.
Upgrade Step:
1. Make sure [C:/engima2] is exist, if not, please create this folder.
2. copy [uImage] and [e2jffs2.img] to [C:/engima2]
3. Connect USB stick to STB
4. Keep Pressing [OK] Button in Front Panel, then power on STB.
5. After 5 seconds, you will see [Forc] in LED, release [OK] button and press
Button.
6. if everything OK, You will see [U LD] shining in LED this is the point that get T TO
7. if upgrade success, You will see [SUCC] and STB reboot automatically
If upgrade not finishes in 5 minutes, then there must be something wrong, please
check your configuration and re-try.
all I get is T TO on display of box and still no upgrade.
can anyone please help me
6. if everything OK, You will see [U LD] shining in LED this is the point that get T TO
7. if upgrade success, You will see [SUCC] and STB reboot automatically
If upgrade not finishes in 5 minutes, then there must be something wrong, please
check your configuration and re-try.
all I get is T TO on display of box and still no upgrade.
can anyone please help me