Unknown Sim?????

B

Bengal

Registered
Messages
91
Picked up a DM800HD with the "No CA Found" error.

Used NCF-Sim2-v3.0 on it to get it into flash mode. All went well.

Flashed the box with a clone sim2.01 image (which I know works just fine as I use it on another clone).

Powered of box and powered it back up and its back to the "No CA Found" error.

This time however, neither NCF or Dreamup connects to the box.

Took Sim out to give it a clean just in case and I don't recognise it.

It has nothing printed on it on the chip side and on the other side it has the following printed on it:

WT00
1459

Also looking at the board, it has a fan on the CPU but there is nowhere to plug it in (if that's relevant).

Wondered if anyone can shed some light on what Sim this could be.
 
freon

freon

Registered
Messages
379
simt1.jpg
SIM 1.0
 
B

Bengal

Registered
Messages
91
so if its a sim 1.0 are there any images for this sim or can I simply change the sim to a 2.01?
 
freon

freon

Registered
Messages
379
As I wrote - you have a SIM 1.0 card.
There is a image for upgrade to ferrari.
SSL 72 is max for this SIM.
 
freon

freon

Registered
Messages
379
Change the SIM to 2.01 (remove this one, and put in SIM 2.01) freely, put the SSL for SIM 2.01 and image - no problem.
 
B

Brummie

Staff member
Administrator
Messages
5,794
some of the early clone DM800 with sim 1 were not compatible with sim 2.01 there was hardware issues they were ok with early Ferrari sims
 
B

Bengal

Registered
Messages
91
Thanks all. Will try flashing with SSL72 image and if that doesn't work will try swapping the Sim from my other box to see if it works before I invest in a new Sim.
 
B

Bengal

Registered
Messages
91
Thanks for the pointer, however everyone I try, I keep getting the message "File not found".
 
B

Bengal

Registered
Messages
91
OK, managed to download one of the images.

Can anyone point me to a BL72 download, have had a look around and can't seem to find one.
 
B

Bengal

Registered
Messages
91
@ Ferret, that's the link from which I managed to download the image (in fact its the only one I could download as all the other links seem to be dead).

In fact its the one you posted (post 13) so assume by your post that the bootloader is within the image?
 
B

Brummie

Staff member
Administrator
Messages
5,794
yes the bootloader is within the image you need to highlite the both files and right click and choose extract and it then will become one file after extraction
 
B

Bengal

Registered
Messages
91
Having problems flashing box using dreamup and Enforcer.

When the flash button is ungreyed I select the image I downloaded (ie the one that Ferret posted) and I get an error message saying file to big.

Any ideas?
 
B

Bengal

Registered
Messages
91
Found some different images but am still getting the same problem.

Can any one point to a bootloader 72 or lower so I can try and flash that to the box to see if I can get the box to communicate?
 
B

Bengal

Registered
Messages
91
Ho hum, didn't work.........still get the message "file to big".

Think I may have buggered the Sim altogether

Will try replacing the sim with a 2.01 one and see if it works.

I assume there is no way of getting hold of another sim 1 given how old they are?
 
You must log in or register to reply here.
Top