Tune Failed DM 800se ORGINAL

[macola.hr]

I have a problem on the original receiver DM 800se. List of STB's @ Last Don@ was a problem with the list before.
I have 4 satellites including two Astra (19.2E) and Hotbird (13E) problem happens to me When you review each program with Hotbird and then get back on Astra at all the programs on my Astra Tune Failed while standing on Hotbird still all work, other two satellites just do not work.
Restart enigma and then we all be ok until you do the same, I changed a few image and have the same problem again.
Does anyone know what the problem is because the signal is good in all frequency bands and all work properly until you make this up.
Thnks!

 

[bertazwin]

I don`t know... what is with 800SE, but 800HD has many problems with multiswitches.
wisi und spaun works very good, other was with problems.
more ideas I haven`t.
sorry

 

[passete]

I have a problem on the original receiver DM 800se. List of STB's @ Last Don@ was a problem with the list before.
I have 4 satellites including two Astra (19.2E) and Hotbird (13E)problem happens to me When you review each program with Hotbird and !

Hello
So, You have only 2 satellites :
2X astra and 2X hotbird ?

If True, why using a diseqc X4 setup ?
Try to setup just to 2 sat's :
A = Hotbird and B = Astra (or vice versa)

Good Luck

 

[macola.hr]

Hello
So, You have only 2 satellites :
2X astra and 2X hotbird ?

If True, why using a diseqc X4 setup ?
Try to setup just to 2 sat's :
A = Hotbird and B = Astra (or vice versa)

Good Luck

I said that I have 4 satellites.
The settings for them are simple ==> A / B / C / D ==> Sirius (4.8E), Eurobird 9A (9E), Hotbird (13E) and Astra (19.2E)


There are clones DM800 and DM800se and everything works perfectly not know what's the problem here in the originally

 

[passete]

Sorry, maybe is masked on your first post !
I can't read any sirius or eurobird sat .

Anyway, i'm using a similar setup, on my 800se, and don't have this issue.

Make your own settings, it takes about 30 seconds with Dreamset (there is a tutorial on the forum), or try settings from another one.

Good Luck

 

[macola.hr]

Thanks to everyone who wanted to help my problem was in the DiSEqC switch 4/1 TV MAX , because the switch can not work with the DM800se.

DiSEqC 4/1 TV MAX

I put a new DiSEqC switch and now everything works perfectly there are clearly differences in the price of DiSEqC switches.
The rule is that the cheapest is actually the most expensive thing