use gbox811 for update FFF400 ! 30-40 min !
after update use oscam !
2017/04/30 15:16:06 761D8A64 c (ecm) xxxx (0500&030B00/1318//2457/15C): found (269 ms) by TNTSat (L/1/6/8) - M6
OK, i have make wrong patch of scam, mgcamd, predator, didem, cerebro, daytona, opos, gold, fun .... nothing work?Those are fake solutions posted by new members which are misleading genuine members
What seems to work is updating in a Viaccess CI module. Even though TNTSAT viacess modules do not exist, general Viaccess CI modules appear to update the card.
2017/04/30 23:19:54 50406B65 c (ecm) tvheadend (0500@030B00/1318/2329/15C:DBEDD8B68AB2E9FC97D3BA539BB163B9): found (284 ms) by TNTSat - TF1
Well. This time you made it wrong. so many members were asking for a Genuine answer, until now nothing. I for MYSELF challenge you to resolve this problem . otherwise any messages been posted were bull sh"t.OK, i have make wrong patch of scam, mgcamd, predator, didem, cerebro, daytona, opos, gold, fun .... nothing work?
@ valentino50
Please post log from gbox!
Obviously. you are out of the equationI can confirm this!
I have a TNTSat v5 card (from 2016, valid til 2020) which has not been working in OSCam due to the change. I do not have an official TNTSat HD receiver (my only receiver was an SD Strong 6410 from 2008 which I got rid of last year!)
I have a Fransat Neotion Viaccess Orca CI+ module. I put the TNTSat card in this and tuned to M6 on 19.2°E for fifteen minutes. The CAM gives an on-screen message of "You do not have the rights to view this channel", but now I have my card back in OSCam, the channels are all clearing perfectly!
Code:2017/04/30 23:19:54 50406B65 c (ecm) tvheadend (0500@030B00/1318/2329/15C:DBEDD8B68AB2E9FC97D3BA539BB163B9): found (284 ms) by TNTSat - TF1
Please post log from gbox!
Viaccess EMM response: 90 40
===== Via EMM on CaID 0x0500, pid 0x168C ======
prov: FFF40, MKey: 03
-EMM-------------------------------------------
8B 70 8D 90 03 FF F4 03 92 08 E6 43 20 0B 3D 2C
EC 30 81 72 B4 97 59 C6 6A 0E 58 67 52 5A 10 4C
D6 42 C2 10 1B F6 F4 3C 63 C0 D5 D6 F3 2F C1 C9
77 22 DF C1 81 F1 66 A8 1B 89 3D F3 05 51 2D 94
D1 52 E8 49 1A AC 99 15 FC 98 38 E0 8A 51 67 D4
30 2A 16 ED CF 90 C6 6F C5 45 4D 8E E6 5F 25 CD
D4 37 E7 9E 71 CC 91 BA 64 C8 40 F8 11 B1 1D 83
38 73 1D 86 DA FC AD 50 15 6B 7B FA 98 93 0D 2E
19 02 DD 64 96 43 F0 08 E3 59 42 F2 47 0F EF 78
already selected card 1
-Send to card 1 -----------------------------
CA 1C 00 03 88 92 08 E6 43 20 0B 3D 2C EC 30 81
72 B4 97 59 C6 6A 0E 58 67 52 5A 10 4C D6 42 C2
10 1B F6 F4 3C 63 C0 D5 D6 F3 2F C1 C9 77 22 DF
C1 81 F1 66 A8 1B 89 3D F3 05 51 2D 94 D1 52 E8
49 1A AC 99 15 FC 98 38 E0 8A 51 67 D4 30 2A 16
ED CF 90 C6 6F C5 45 4D 8E E6 5F 25 CD D4 37 E7
9E 71 CC 91 BA 64 C8 40 F8 11 B1 1D 83 38 73 1D
86 DA FC AD 50 15 6B 7B FA 98 93 0D 2E 19 02 DD
64 96 43 F0 08 E3 59 42 F2 47 0F EF 78
card 1 response in 228 ms
Viaccess EMM response: 90 40
already selected card 1
I can confirm this!
I have a TNTSat v5 card (from 2016, valid til 2020) which has not been working in OSCam due to the change. I do not have an official TNTSat HD receiver (my only receiver was an SD Strong 6410 from 2008 which I got rid of last year!)
I have a Fransat Neotion Viaccess Orca CI+ module. I put the TNTSat card in this and tuned to M6 on 19.2°E for fifteen minutes. The CAM gives an on-screen message of "You do not have the rights to view this channel", but now I have my card back in OSCam, the channels are all clearing perfectly!
Code:2017/04/30 23:19:54 50406B65 c (ecm) tvheadend (0500@030B00/1318/2329/15C:DBEDD8B68AB2E9FC97D3BA539BB163B9): found (284 ms) by TNTSat - TF1