TNT Sat 19.2°E ** Chat Only Here, No Keys **

Status
Not open for further replies.
P

Pernambuco

Registered
Messages
154
zetamax said:
The screen is black even the icon of viacc3ss is green ...
Click to expand...
I'm affraid, oscam_ymod for ppc (Dreambox) architecture is with bug for TNTsat. For this reason TNTsat channels DON'T WORK with emu in your receiver.
Try to find (and exchange) another binary ppc file for oscam_ymod.
Maybe someone on SAT-UNIVERSE Forum has proper oscam_ymod (working with TNTsat) for ppc?

On DVHK Forum this situation is described exactly for dm5620s receiver (with the same ppc architecture).
The same configuration [oscam.keys] will WORK PROPERLY on receivers with another (for example SH4) architecture.

Main SID for TF1 SD channel = 8710 dec (0x2206), additional = 8730 (0x221A). You use additional.
 
Last edited:
T

thetempuser

Registered
Messages
21
The same configuration [oscam.keys said:
will WORK PROPERLY on receivers with another (for example SH4) architecture.
Click to expand...

Can you please point to a link where I can download an Ymod for T*nt for SH4 that's working and oscam.keys, I tried a lot none seems to work, a lot ar for dreambox.
Thank you.

(Enigma 2 HDMU - AMiko Alien 8900)
 
G

georgeflu

Registered
Messages
485
thetempuser said:
Can you please point to a link where I can download an Ymod for T*nt for SH4 that's working and oscam.keys, I tried a lot none seems to work, a lot ar for dreambox.
Thank you.

(Enigma 2 HDMU - AMiko Alien 8900)
Click to expand...

http://www.sat-universe.com/showthread.php?t=223900&page=9 here is the ymod section,download the one you want (sh4). there isn't any special file for the image.
for k*eys,you can use any of those links
http://www.sat-universe.com/showthread.php?t=180521&page=2
http://www.sat-universe.com/showthread.php?t=200363&page=25
 
M

magictails

Registered
Messages
428
zetamax said:
The screen is black even the icon of viacc3ss is green
I've an Enigma1 decoder (img Nabilo) and osc@mymod t50 (or t52) right key but... no light :mecry:
Click to expand...

hi

For E1 use Doscam v19 work well with tntsat emu

for E2 use oscam ymod 52

or with vplug server pc to dream by lan

@ +
 
G

georgeflu

Registered
Messages
485
zetamax said:
The screen is black even the icon of viacc3ss is green
I've an Enigma1 decoder (img Nabilo) and osc@mymod t50 (or t52) right key but... no light :mecry:
Click to expand...

Pernambuco said:
I'm affraid, oscam_ymod for ppc (Dreambox) architecture is with bug for TNTsat. For this reason TNTsat channels DON'T WORK with emu in your receiver.
Try to find (and exchange) another binary ppc file for oscam_ymod.
Maybe someone on SAT-UNIVERSE Forum has proper oscam_ymod (working with TNTsat) for ppc?

On DVHK Forum this situation is described exactly for dm5620s receiver (with the same ppc architecture).
The same configuration [oscam.keys] will WORK PROPERLY on receivers with another (for example SH4) architecture.

Main SID for TF1 SD channel = 8710 dec (0x2206), additional = 8730 (0x221A). You use additional.
Click to expand...

i had it in dm7020 (i put the e1 file of the ymod section) and it was ok.
but than i changed it with doscam0.18+fun card because i can't reshare it in my other receivers in ymod.
 
Z

zetamax

Registered
Messages
9
georgeflu said:
the problem is dm500 and not nemesis e1. the friend above have a dm7020 and should work.
Click to expand...

In fact... but it isn't so.
Could you send me your conf files? Also in pm :rolleyes:
I tried also SifTe@m img (unluckly) and now I'm coming to try Gemini :mecry:
 
T

thetempuser

Registered
Messages
21
Last edited:
empb

empb

SU Team: It's All Good (Fausto v1.45/Newcamd/vplug
Staff member
Administrator
Messages
10,285
I think there is a fault at the moment HD ok (ARTE, TF1, FRANCE 2, M6), but some SD not working (nil ECM) eg FRANCE 4, FRANCE 5

anyone confirm? Or issue with vplug server at my end?
 
empb

empb

SU Team: It's All Good (Fausto v1.45/Newcamd/vplug
Staff member
Administrator
Messages
10,285
007.4 said:
All working OK here with EMU.
Click to expand...

Weird I had to delete transponder 12402V 27500 and re-scan to get working again - so not vplug server CCCam issue or Fausto/vplug/Newcamd issue
 
M

marrakr

Registered
Messages
293
Is tnt working with vplug + Ferguson Ariva 210 HD? Or is there any problem with this soft I can't still do it:/
 
G

georgeflu

Registered
Messages
485
EnoSat said:
georgeflu talk about ppc platform , not about sh4 platform
Click to expand...

its about other question.the friend asked about sh4 and i wrote the links for bin and k*eys a few messages above (the one he has in quote).
about the channels,they are still working in oscamymod and doscam (france4,tf1,arte etc).
 
Last edited:
A

allang841

Registered
Messages
2
How do i get tnt sat working on vplug?

i get this message

Info: Server [09:26:45.041] ECM request: Changed ECM len because of CCcam protocol limit! New len: 298, old len: 42
Info: C00000230 [09:26:45.072] ECM request: 0500/030B00/21FE/0F9570B6 for ShareID: 0000006E Redlight Mixx
Info: Server [09:26:45.134] ECM could not be decrypted by vPlug Module
Info: C00000230 [09:26:45.150] Send data to CCcam client C00000230, data length: 4:
2D FF 00 00
Warn: C00000230 [09:26:45.150] ECM could not be decrypted by ShareID 0000006E (76) , ECM Nr.: 4
 
O

ooOO_SORGOS_OOoo

allang841 said:
How do i get tnt sat working on vplug?

i get this message

Info: Server [09:26:45.041] ECM request: Changed ECM len because of CCcam protocol limit! New len: 298, old len: 42
Info: C00000230 [09:26:45.072] ECM request: 0500/030B00/21FE/0F9570B6 for ShareID: 0000006E Redlight Mixx
Info: Server [09:26:45.134] ECM could not be decrypted by vPlug Module
Info: C00000230 [09:26:45.150] Send data to CCcam client C00000230, data length: 4:
2D FF 00 00
Warn: C00000230 [09:26:45.150] ECM could not be decrypted by ShareID 0000006E (76) , ECM Nr.: 4
Click to expand...

vplug v2.4.6 use or nw emu 1.1.5

tnt sat working sd hd full

regards
 
Status
Not open for further replies.
Top