It may be like ClarkeTech video pid 22785 should be.
Thank you for all the advise, I think I'm probably not cut out for this, I've done everything you suggested and more but every time I do the BISS key and restart the TM I get no video or audio message on channel 5 , more 4 +1 and film 4+1 so that it I better leave well alone I have ITV and BBC so that will have to do
You must correct the channel list in the ClarkeTech Editor. PMT is in the list of william-1 if you have this.PMT is wrong.
65535
PMT 6400
What is a PMT and how do I correct it and with what if it needs correcting
Thank you all
Secondly when I do a factory reset and do a scan I scan 11495v44100 but once I load the channel list it changes to 11495v44102 , I don't know if this makes a difference
Have sent you a private message.Manic thank you but I don't know how many times over the last few weeks I've done exactly as you've just said and to no avail , but if everyone else who uses Intelsat 907 gets channel 5 then I must be doing something wrong or my new TM box isn't working properly with the feed scan on
I would also like to say a BIG thank you for your help , without it I would still be stuck on 15W looking for the channels
147p should have been withdrawn due to errors (TM-5402-M3-01-11-2016) shows as 146p but is 147p do no use this one TM-5402-M3-01-11-2016
Use 146P that is what most of us use TM-5402-M3-22-08-2016
http://downloadtmsw.com/bbs/reply.php?board=tm5402hd&num=68
If it works for you then leave it.Hi William - I'm currently using 147p and don't 'seem' to have any problems, but would you recommend I re-install 146p?
Thanks in advance for your help
You need to select the keys starting D5 81 F9sorry if this is a dumb question, but how do I select the correct bliss key for a scrambled channel. I'm presented with 100 keys and each I select row 41 the channel name and frequency is stored but the channel is still scrambled. How do I know when key from 1 to 100 to select.
Thank you