Technocoms Firmware

B

bozomustafa_68

Registered
Messages
16,935
Technocoms v3.56 18-5-2010 Official release
* new label added to server thus u can add ur own name

v356 fix1a uploaded:
* updated with dragnoX gshare+gsh
* load defautl server then host will be AAAABBBB
* for jsc worldcup change back host to ABCDEFGH,AABBCCDD,CCDDAABB
sure port is same 12005
* for orbit 12006 is orbit on this fix1a
* for almajd port is 13002
waiting ur test and comment
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
Technocoms v357 26-5-2010 official Release

Code: 
* Recording restart fixed
* sharing speed improved
* keys updated ( new biss keys added eurobird 9e NASN+espn + ch33 nile + seca keys updated + tv globo working key 26-5-2010)
* Eurosport 11240 activated and working ok
* cyfra , polsat/50005 ( some channels)

its strongly recommended to load default server - exit menu - turn off/on main switch
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
Technocoms v359 28-5-2010 official Release


Code: 
* Recording bugs on some flash disks fixed 
* turbo zapping for FTA and scrambled channels
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
Technocoms v360 new fix 16-6-2010

Code: 
* database fixed
* g+ return back to the new one 350..360 while the previous version the g+ was 349 and below
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
Technocoms v3.61 18-6-2010 official Relase


Code: 
* G+ for boxes with boot 1.25 please send wcup3 (EEEEEEEF) ID 09030xxxxx
for boxes with boot 1.21 please send wcup2 (EEEEEEEE) ID 090205xxxx
* ECM save on exit now supported and tested ok
* server counts 18
* pink 13000 removed for those who need it just add it manually

Code: 
File comment: ID 090205xxxx
 x-15000_v361_Wcup2
 
File comment: ID 090301xxxx & ID 090307xxxx
 x-15000_v361_Wcup3
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
Technocoms v3.61 Fix 21-6-2010 official Release

Code: 
* osn cinema bugs fixed
* jsc bugs fixed

note: read ur channel list and save it on flash disk
send the be clean 4tehnocoms
after restart do factory reset
press f1+000
go ip settings make DHCP ON
go server settings press F1 load default servers yes
now send back ur channel list u have just readed

all should work ok now

wcup2 for 090205xxx
wcup3 for 09030xxxx
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
Technocoms v3.62 Official Release BIS 23-6-2010

Code: 
* New BIS keys updated also u can add next keys in via2 edit key menu while old version were in the main fw
* timeout speed up for FTA and scrambled
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
Technocoms v364 30-6-2010 GSH+ ok

Code: 
* Gsh+ fixed load default servers then u`ll get AAAAAAAA
* time shown 4 servers cz now each serial have the exp. from the server not from the client message
 
B

bozomustafa_68

Registered
Messages
16,935
Technocoms v365 Official Release 17-7-2010

Code: 
* Restart fix on some BIS
* fix bugs for BIS smartcards (RS232 sharing)
* sharing speed improved
* Gsh+ ok
 
B

bozomustafa_68

Registered
Messages
16,935
Technocoms Firmware

Code: 
* TNT astra 19E
* Canal Digitaal NL ( 19.2E )
* Bulsat 39E
* TriColor fix (36E)
* Newcamd improved
* counts 20srv
* sharing improved

Code: 
very important it works only on x-12000 \ 11000 \ 14000 \ 15000 \ that have boot 1.25 ONLY
don`t send or use it to old boxes with boot 1.21
 
U

usama2009

Registered
Messages
6,331
Phantompatc-TM5400CI_5600CI_SUPER_144p
Phantompatch-TM5300D_5200D_184p
Phantompatch-TM5300D_5200D_SUPER_144p
Phantompatch-TM5400CI_5600CI_184p
Phantompatch-TM-1000d_TM1000D_314p
Phantompatch-TM-1500ci_TM1000CI_314p
Phantompatch-TM-3000D-P-V3.62
TM-3200_-200-3300-3400_Series-P-V2.61-
 
B

bozomustafa_68

Registered
Messages
16,935
Technocoms Firmware


Code: 
==========================
V1.61 - 2010-11-24
==========================
	1)Replace G-Share+ to GSh2
	2)To open TNTSAT:http://en.kingofsat.net/pack-tntsat.php
 
You must log in or register to reply here.
Top