Hi everyone.
I recently bought a DM800hd and had put 2 LNB 13,28 with DiSEqC.
My dish is like a 60x70cm offset.
Now I focused the dish on 13e to get best signal (it took me days to get it right) and the dreambox satfinder shows 0% signal but single transponders I can get up to 85%
I can normally watch 13e channels (but not all of them/some HD do not work 0% snr)
Well I thought the box was a bit bust so i got a Vu+ UNO - plugged it all in and 13e still shows 0% but transponders have variosu from 40% to 80%?
28e has only 30%(cause i did not fine tune it yet) but I can watch all the channels! Some SKY are glitchy but I can watch BBC HD on 20% signal and it is not glitchy all.
Nevermind. What is the problem- Am i still focused on the wrong SAT. I know 16e has some 13e channels on them? Is there any way I can get the SAT ID /STREAM ID (like on original skyboxes) in Black Hole Satfinder or something?
I use ALPS UNIVERSAL LNB LO:9.75/10.60GHz 0.3db - They apparently are better than the £3 jobbies of ebay? and fit better on my multi lnb bracket better anyway.
What do I need to do to set the dish up correctly pointin to 13e? I mean 28e i just plonk the lnb in the closest "region" it should be as offset and I get single straight away.
Any advice?
I recently bought a DM800hd and had put 2 LNB 13,28 with DiSEqC.
My dish is like a 60x70cm offset.
Now I focused the dish on 13e to get best signal (it took me days to get it right) and the dreambox satfinder shows 0% signal but single transponders I can get up to 85%
I can normally watch 13e channels (but not all of them/some HD do not work 0% snr)
Well I thought the box was a bit bust so i got a Vu+ UNO - plugged it all in and 13e still shows 0% but transponders have variosu from 40% to 80%?
28e has only 30%(cause i did not fine tune it yet) but I can watch all the channels! Some SKY are glitchy but I can watch BBC HD on 20% signal and it is not glitchy all.
Nevermind. What is the problem- Am i still focused on the wrong SAT. I know 16e has some 13e channels on them? Is there any way I can get the SAT ID /STREAM ID (like on original skyboxes) in Black Hole Satfinder or something?
I use ALPS UNIVERSAL LNB LO:9.75/10.60GHz 0.3db - They apparently are better than the £3 jobbies of ebay? and fit better on my multi lnb bracket better anyway.
What do I need to do to set the dish up correctly pointin to 13e? I mean 28e i just plonk the lnb in the closest "region" it should be as offset and I get single straight away.
Any advice?