SSL88 for DM800 Geniune?

lenovo

Registered
Messages
278
Thanks Ferret for reply; where can i find it? i don't make a mistake i confirm is for DM geniune!
 

lenovo

Registered
Messages
278
dreamboxupdate.com

dreambox-secondstage_84-r12.0_dm800.ipk

last is 84

When i put this file on tmp and want to intall it manually I have this message:

opkg:/tmp/dreambox-secondstage_84-r12.0_dm800.ipk:no such file or directory
Collected errors:
*Failed to extract control file from / tmp/ dreambox-secondstage_84-r12.0_dm800.ipk
 

lenovo

Registered
Messages
278
when i select the file to transfert via web interface and click on flash nothing happend!! i don't see the process transfer!!
 

Brummie

Staff member
Administrator
Messages
5,794
if you have flashed an nfi bootloader it just takes seconds if you blink you will miss it,reboot and look on the led you should see it at first start up
 

lenovo

Registered
Messages
278
Nothing happened, here device info: Booloader version Dreambox Second Stage Loader BUILD #76, built 20100419
 

Brummie

Staff member
Administrator
Messages
5,794
try update it to #82 first then after that #84 might need to be done in stages being #84 is OE2
 

Brummie

Staff member
Administrator
Messages
5,794
what are you trying to do update your box, because usually if you flash a later image it will have the new bootloader built into it,it may be the case that the image on your box is an early one and not compatable with the later bootloaders ie OE2 so you may have to reflash a newer image on it
 

lenovo

Registered
Messages
278
That's the problem! when i want to flash it with a new image like DreamElite 4.0 i don't see the process transfert on the browser
 

Brummie

Staff member
Administrator
Messages
5,794
try it with dreamup with nullmodem cable and ethernet cable and make sure you tick the use network box or it will take over 1 hour to flash
 
Top