Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

[Ramboide]

i said it again, try one from november...

Thank you very much. I installed this version from november, Satdreamgr-4.0-gst1-sf4008-20171125, and everything I want works fine. Works better than openATV fot what I want.

 

[rom20051]

I thought Abertis only worked with SatDreamGR 5.

 

[EurovisionLover]

Is it possible to make it work with a TBS card via TransEdit? It seems quite complex to do, but would love being able to!

 

[Ramboide]

I thought Abertis only worked with SatDreamGR 5.

I thought that only worked with SDG 5, and I installed this version, twice, hours attempting to make work everything, but nothing, only with SDG 4 work all fine, in my receiver. Almost nothing worked fine with version 5, but yes with version 4. I have installed SDG4, I've installed and configured everything I need and all working fine.

I'll try other things from now, as seen in this thread in previous pages.

 

[rom20051]

Abertis is not stable with OpenATV, cca 5 minutes and freeze of picture. Any shift with SDG4?

 

[uplevel]

Gigablue HD Quad Plus with OpenATV6.1 works fine without any freezes.

 

[chelo71]

Thank you very much. I installed this version from november, Satdreamgr-4.0-gst1-sf4008-20171125, and everything I want works fine. Works better than openATV fot what I want.

can I have a backup?

 

[Ramboide]

Abertis is not stable with OpenATV, cca 5 minutes and freeze of picture. Any shift with SDG4?

Totally stable with SatDream 4, SDG 5 did not work in my decoder. I installed the version from November recommended by Georgeflu. There is a later version 4 of this year, the last version 4 at the moment, but I did not try it and I do not know if it works well.

 

[georgeflu]

to be clear...
sdg4 and sdg5 both work perfect in all receivers...
only in sf4008,there is a driver issue. there isn't problem in both image 4 and 5 (without update)before november,because there is an older driver which has not "streaming" issue...

 

[MAHDI-DZ]

-OpenATV-
~# opkg install astra-sm
Installing libaio1 (0.3.110) on root.
Downloading http://feeds2.mynonpublic.com/6.1/dm500hd/mips32el/libaio1_0.3.110-r0_mips32el.ipk.
Installing astra-sm (0.2) on root.
Downloading http://feeds2.mynonpublic.com/6.1/dm500hd/mips32el/astra-sm_0.2-r1_mips32el.ipk.
Removing any system startup links for astra-sm ...
Configuring libaio1.
Configuring astra-sm.
Adding system startup for /etc/init.d/astra-sm.

-SDG-
~# opkg install astra-sm
Installing astra-sm (0.2-r5) on root.
Downloading http://188.165.252.42/feeds/satdreamgr-openpli-gst1-4/mips32el/astra-sm_0.2-r5_mips32el.ipk.
Installing libaio1 (0.3.110-r0) on root.
Downloading http://188.165.252.42/feeds/satdreamgr-openpli-gst1-4/mips32el/libaio1_0.3.110-r0_mips32el.ipk.
Installing libdvbcsa1 (1.1.0-r2) on root.
Downloading http://188.165.252.42/feeds/satdreamgr-openpli-gst1-4/mips32el/libdvbcsa1_1.1.0-r2_mips32el.ipk.
Removing any system startup links for astra-sm ...
Configuring libaio1.
Configuring libdvbcsa1.
Configuring astra-sm.
Adding system startup for /etc/init.d/astra-sm.

not works atv 6.1 sh4 cpu

log oscam

2018/02/10 21:23:29 6B81143D c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/02/10 21:23:36 6B81143D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2018/02/10 21:23:36 6B81143D c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in caPMT
2018/02/10 21:23:36 6B81143D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 138B VPID 0000
2018/02/10 21:23:36 72B63CB2 r (emu) Key not found: F 87547A08
2018/02/10 21:23:36 72B63CB2 r (emu) Key not found: F AB90EDC3
2018/02/10 21:23:36 72B63CB2 r (emu) Key not found: F 03EB1F43
2018/02/10 21:23:36 72B63CB2 r (emu) Key not found: F 03EB138B
2018/02/10 21:23:36 72B63CB2 r (emu) Key found: F 03EB1FFF 00000000
2018/02/10 21:23:36 6B81143D c (ecm) root (2600@000000/0000/03EB/11:6F45409A8CD9472ECED0A21EE1585773): found (6 ms) by emulator
2018/02/10 21:23:36 6B81143D c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT
2018/02/10 21:24:07 65B2E3C3 p (reader) cccam_1 [cccam] disconnected: reason inactivity
2018/02/10 21:25:30 6B81143D c (dvbapi) Demuxer 0 stop descrambling program number 03EB (2600@000000:03EB unknown)
2018/02/10 21:25:30 6B81143D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2018/02/10 21:25:30 6B81143D c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in caPMT
2018/02/10 21:25:30 6B81143D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 138B VPID 0000
2018/02/10 21:25:30 72B63CB2 r (emu) Key not found: F 87547A08
2018/02/10 21:25:30 72B63CB2 r (emu) Key not found: F AB90EDC3
2018/02/10 21:25:30 72B63CB2 r (emu) Key not found: F 03EB1F43
2018/02/10 21:25:30 72B63CB2 r (emu) Key not found: F 03EB138B
2018/02/10 21:25:30 72B63CB2 r (emu) Key found: F 03EB1FFF 00000000
2018/02/10 21:25:31 6B81143D c (ecm) root (2600@000000/0000/03EB/11:6F45409A8CD9472ECED0A21EE1585773): found (9 ms) by emulator (L/1/2/2)
2018/02/10 21:25:31 6B81143D c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT

 

[Ramboide]

to be clear...
sdg4 and sdg5 both work perfect in all receivers...
only in sf4008,there is a driver issue. there isn't problem in both image 4 and 5 (without update)before november,because there is an older driver which has not "streaming" issue...

Would work fine with openATV of November or before?

 

[Ramboide]

I had problems with openATV 6.1, but could have not problems with openATV 6.0. Isn't it? Wich image is better for all what can be made with this decoder, openATV 6.0, SDG 4, or SDG 5?

 

[georgeflu]

i don't know what and how atv uses and works.
the only one that i know,is tha atv uses modified drivers,which means different behavior from sdg while using the same date driver...

 

[mouffek]

sh4 cpu

 

[Ramboide]

i don't know what and how atv uses and works.
the only one that i know,is tha atv uses modified drivers,which means different behavior from sdg while using the same date driver...

SDG 4 works well. Do you recommend SDG 5? Now I know it must be from November or before and both of them work in this decoder. I have installed the skin "Pli-HD fullnight" and I like it.

 

[Ramboide]

I'm using SDG 4 from Novemnber and work perfectly. My problems were due to driver issue with PTV streaming in Octagon-SF-4008, that this problem does not exist in SDG from November, versions after November have this issue.

 

[Ramboide]

Obtaining keys is hard and difficult but not impossible. There are people who attain to obtain the keys, but do not give or share them to other people, it would suppose to other people to obtain them without any effort, while others have worked hard to obtain them. So I want to get them by myself.

To sum up. Due to these channels are different from normal channels. Can I get them with my decoder connected to a PC and appropriate software? Or I need the TBS decoder and a super computer?

 

[nomadeja]

Obtaining keys is hard and difficult but not impossible. There are people who attain to obtain the keys, but do not give or share them to other people, it would suppose to other people to obtain them without any effort, while others have worked hard to obtain them. So I want to get them by myself.

To sum up. Due to these channels are different from normal channels. Can I get them with my decoder connected to a PC and appropriate software? Or I need the TBS decoder and a super computer?

It's very difficult to obtain by your own this kind of keys. You must start obtaining regular biss keys and then, if you know how, try to get this Abertis DTT keys.

 

[uplevel]

It's very difficult to obtain by your own this kind of keys. You must start obtaining regular biss keys and then, if you know how, try to get this Abertis DTT keys.

I think that finding keys with crypt8 and rbt table is useless, because no RBT Table online for A0hx00h.
May be there is another tricky way to obtain keys...

 

[Ramboide]

Step by Step. After several days, thanks to plevel (page 15), today I have tried to get PIDs of transmissions from my decoder. It's very easy, but I had not tried it so far. Now to the next step, the most difficult and probably impossible.