Sly Germany v14 CAID 098C boxid ?

[tequ69]

Hi.

Someone please help. Got new card (v14) and Humax receiver. Receiver has serial number of 14 digits on osd menus and 15 digits in box. How should I define boxid for oscam to get card working. Conversions I have found has 11 or 17 digits serial numbers.

Tried also with boxid 12345678, but has no success with that.

Tested with oscam release r9784.

 

[cojo11]

you must block all emm,save uniuqe an write manuell
Sky paired the card with the Receiver

 

[xXTomXx]

if you use oscam without blocking config it might be to late, card could be already paired.

 

[tequ69]

There was message with the card and receiver that those are allready paired. Not sure if that is really done in advance. However emm was not blocked from the beginning and card has been used twice in original receiver (to be sure it's working). This was probably mistake which can not be reversed. But for the boxid, is it enough to use 12345678 and no need for conversion from serial?

 

[xXTomXx]

its not neccessary to use correct boxid. 12345678 is enough.

 

[Lawman]

Paired

If you had the card in your Org Box and it was working it has Paired up. The Cards are sent out unpaired. The only chance you have is to "destroy your card" and get a replacement which will arrived unpaid, and then use oscam and the proper settings to block the "bad" emms..

 

[tequ69]

Thanks for the update. Card seems to be "broken" then. I left it running on oscam and left channel open for last night. For some reason there has been some OK ecm's too (about 400). But mostly NOK's. I haven't logged everything so don't know what happened.

 

[Benelevi]

HI guys,

i need help with sky v14 card please,

if anyone can help please inform me,

help is much appreciated,

Thank you,

Levente

 

[Benelevi]

hi mate,

i gues youa re here the guy with the most experience,

my A02 card from Sky germany has been changed to V14,

unfortunately i don't know my way around that much, i would use this card to share only with family,

maincard is not paired yet with the Human S HD4 box,

please let me know if you could help me,

thank you in advance,

regards,

Levente

 

[Benelevi]

hello all,

i have the same issue,

can anyone help me please , not really an expert in this,

thx alot for your help,

i might me able to help in another way with upc and digi HU,

looking forward for some help,

thank you,

Regards,

Levente

 

[ersin328]

hi there for german v14 card oscam reader.

[reader]
label = v14
description =
enable = 0
protocol = internal
device = /dev/sci0
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 098C
atr =
boxid = 12345678
boxkey =
rsakey =
ins7e =
ins7e11 = 15
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 450
cardmhz = 2700
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 0
saveemm-u = 1
saveemm-s = 0
saveemm-g = 0
blockemm-bylen = 1-38,40,42-44,65-124,126-127,131,139-255
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 2
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0