Sky Star 2 Express HD owner

A

AHMAD ALBAHETH

Senior Member
Messages
166



This the second article about this DVB-S card

Which is the only card working with two driver mode the new BDA Driver and second WDM with DVB-S application

With testing the new Encryption PowerVu with new Module
for DVB Dream I had faced a problem with WDM driver used
DVB Dream and the channel not working
and the Modules can't start
For that I had to switch to BDA driver to tested that
And the Result was fantastic its working charm
I knew that all owners these card are using just the BDA driver with DVB-s app to watch.
And the last year I was put the Successful test to let the card working with DVB Dream and Alt DVB with WDM Driver

Why because its support the DiseqC mode

For that I digging for the reason and the setting for Device not enable

1- Full TS mode was disable and I enabled it

And here the snapshot for that

tVi9v7n.png


rvfP2oj.png


doQKsoQ.png


oUMkNoG.png



​
 
E

exmax

Registered
Messages
27
how did you do this?

i have Sky Star 2 Express HD and that card is not working on my pc with dvb dream at all .. its always freezing

(with other software is working)
 
A

Alvaro junior

Registered
Messages
5
I have Skystar 2 express HD, its really working on dvb viewer, dream and alt dvb, but if scan another satellite/diseq, not working for all, not responding and close program. if there is a problem with my device? by the way i can't use skystar 2 sdk interface on my alt dvb. Thanks for all.
 
fiji

fiji

Well Known Member
Messages
1,097
device driver

Hello My Friend AHMAD ALBAHETH !

I have Skystar 2 SD Card Working Fine DVBDream 2.6 First I try

It BDA Driver Mode The Signal Quality IS Too Low & Some Weak TP

Are No Tune In BDA Driver Mode So I try This On WDM Mode Now

Signal Quality Is High & Weak Signal TP Now Scan .

I Suggest First Uninstall BDA Driver Now Run Provided CD

Skystar2 Install First Option Is Install Driver Wen This Complete

Now Cancel Software Install .

Now Run DVBDream Its May Stuck For 30 Second Now Go to device

Option Select First Driver Called B2C2 Direct-On Driver Version

Press Ok & Restart Dvb Dream Again . Check My Setting In Below

. Please Note If One Card In Pc Only One Driver IS Work

Both Driver Window Is No Showing Or Install A Time I Mean

BDA & WDM Driver .

121zyp2.jpg


11ryw6v.jpg
 
A

AHMAD ALBAHETH

Senior Member
Messages
166
fiji said:
Hello My Friend AHMAD ALBAHETH !

I have Skystar 2 SD Card Working Fine DVBDream 2.6 First I try

It BDA Driver Mode The Signal Quality IS Too Low & Some Weak TP

Are No Tune In BDA Driver Mode So I try This On WDM Mode Now

Signal Quality Is High & Weak Signal TP Now Scan .

I Suggest First Uninstall BDA Driver Now Run Provided CD

Skystar2 Install First Option Is Install Driver Wen This Complete

Now Cancel Software Install .

Now Run DVBDream Its May Stuck For 30 Second Now Go to device

Option Select First Driver Called B2C2 Direct-On Driver Version

Press Ok & Restart Dvb Dream Again . Check My Setting In Below

. Please Note If One Card In Pc Only One Driver IS Work

Both Driver Window Is No Showing Or Install A Time I Mean

BDA & WDM Driver .

121zyp2.jpg


11ryw6v.jpg
Click to expand...

that's nice

but for me to get the full performance for card it must have the two diver BDA diver (basic driver for card) WDM driver its virtual drive

for that it must installed both of them

this just for SKY STAR 2 EXPRESS HD
 
Last edited:
A

Alvaro junior

Registered
Messages
5
AHMAD ALBAHETH said:
that's nice

but for me to get the full performance for card it must have the two diver BDA diver (basic driver for card) WDM driver its virtual drive

for that it must installed both of them

this just for SKY STAR 2 EXPRESS HD
Click to expand...





continued what is the solution to Skystar expres HD besides bda driver ?
Could be used b2c2,sdk or direct on?
Tanks
 
You must log in or register to reply here.
Top