Sky Link 23.5E ?

[macman32]

hi nice site , need some help pls, what are the tp for this sat Sky Link 23.5E , thats open with new softcam ?

 

[mdt]

hi nice site , need some help pls, what are the tp for this sat Sky Link 23.5E , thats open with new softcam ?

the txp,s you want are.... 11.798.h.27500/11.836.h.27500/11.895.v.27500/11.934.v.27500/11.973.v.27500/12.070.h.27500 and 12,525.v.27500

as per the post in the key thread here: http://www.sat-universe.com/showpost.php?p=985562&postcount=3

24 channels clear from the package with softcam,regards mdt

 

[kargo.25]

hi nice site , need some help pls, what are the tp for this sat Sky Link 23.5E , thats open with new softcam ?

yes working here kargo.25 Technomate sofcam http://www.sat-universe.com/showthread.php?t=206579&page=14

 

[hepo1]

Hi i using technomate 6800HD but i put softcam in the box and not working for me..what i do wrong? thanks

 

[kargo.25]

Hi i using technomate 6800HD but i put softcam in the box and not working for me..what i do wrong? thanks

6800HD

For any other newbies, this is what I did:

1. I copied latest Technomate software, latest patch and latest 'kargo.25 softcam' onto a USB stick.
2. Transfered Technomate software to receiver. (PIN code 0000) MENU -> USB -> Data Transfer -> select technomate file -> OK -> reboot.
3. Transfer patch to receiver. MENU -> USB -> Data Transfer -> select patch file -> OK -> reboot.
4. Transfer softcam to receiver. MENU -> USB -> Data Transfer -> select softcam file -> OK -> reboot.
5. Peformed "Blind Scan" of desired satellite.

 

[hepo1]

For me not working i using technomate 6800HD+ i put new patch Phantompatch-TM6800HD_23-07-2012 -706p..what is wrong i need new patch or what.thanks again..help me..

 

[mdt]

For me not working i using technomate 6800HD+ i put new patch Phantompatch-TM6800HD_23-07-2012 -706p..what is wrong i need new patch or what.thanks again..help me..

did you update the softcam?,regards mdt

 

[hepo1]

Which softcam needed..i put may be 4 or 5 softcam from this forum but not open any channels..thanks

 

[Thijs]

always use the latest softcam keys cause they would be the uptodate ones
i just see you have a non super i don't think there is a latest patch for them that clears sky link 23.5 east

 

[kargo.25]

did you update the softcam?,regards mdt

here softcam working...http://www.sat-universe.com/showthread.php?t=206579&page=14

 

[hepo1]

sorry but not working for me..i think i need TM6800 hd SUPER and not TM6800HD+..but 39E bullsat and 19E astra working perfect..I do not understand what is the problem with 23.5E astra.. :mecry:

 

[mdt]

sorry but not working for me..i think i need TM6800 hd SUPER and not TM6800HD+..but 39E bullsat and 19E astra working perfect..I do not understand what is the problem with 23.5E astra.. :mecry:

this is the problem sometimes with the tm patches... cs-link works on a old 7765via with updated softcam but wont work on the 6800hd. maybe @phantom can look into it for you,regards mdt

 

[hepo1]

Great :clapping::nana: Its working now on phantompatch 702p.stb or less.. But if i put this patch i lose 19.2astra.. Bullsat its ok..after 703p.stb i lose astra 23.5 :mecry:
and 19.2 and 39 its ok