Sifteam and Wifi

[dalbjerg]

Hello

I have bougth a Buffalo WLI-UC-GN. Witch should use Ralink 2870.

When i do a "cat /proc/bus/usb/devices" i get this:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0411 ProdID=015d Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms


So it is a Ralink devices. But it can't find any wifi SSID. But my laptop can find it.

Can anyone help me?

Regards Kenneth Dalbjerg

 

[jamie-warez]

Make sure your router is in G mode not N mode the drivers dont support N mode at this time....

 

[dalbjerg]

Thanks for you reply

My router is only support G mode.

if i run iwconfig, I only get lo and eth0. No wifi networkcard?

 

[dalbjerg]

Its is because this Buffalo WLI-UC-GN is not a Ralink 2870?