SifTeam-1.8.5-5620 MaxVar
- Thread starter parsing
- Start date
zerocoolno
Registered
- Messages
- 5
Any feedback....maybe someone tried it....With a dm500, there is no room for experimentation since it does not take multiboot...thanks
B
boxgot
I have tried with 5620,and it works
whould you please explain more details concerning "have to set mID 25" for IPBox 250 and "set mID dm700" for multiboot? what dou you mean by that? what is mID and where can I edit it?
I have some problem with multiboot versions to be installed on HDD.
The Gemini 4.2 For dm7000 is the only firmware that I can install it to hdd as the second firmware using Flash Wizard 6.3. I reciev some errors like "Invalid firmware image" or "fw2 file not supported yet" or somthing like that when installing an image to hdd
I have some problem with multiboot versions to be installed on HDD.
The Gemini 4.2 For dm7000 is the only firmware that I can install it to hdd as the second firmware using Flash Wizard 6.3. I reciev some errors like "Invalid firmware image" or "fw2 file not supported yet" or somthing like that when installing an image to hdd
- Messages
- 6,174
Those notes about setting mID only apply to ipbox(relook) receivers. You don't have to set anything on dreambox. As for fw2 those are backup files, you should try installing .img in multiboot.
Demolition
Registered
- Messages
- 203
SifTeam-1.8.5.2BETA2-5620MV is out ...
sorry Can`t Upload
sorry Can`t Upload
Dear Rocknroll
Many Thanks for your kindness and help. Yesterday I searched many sites on the web. Finally I found the solution. I implemented it successfully and hereby I write required steps:
1. Install SifTeam 1.8.5.1.250 to the flash of Relook 250 (I got it in our forum)
2. Install Flash Wizard Pro 6.3 (From SifTeam which is adapted for Relook 250) to the PC
3. There Are many DM7000 images that can be installed on the Hard Disk of Relook. For Example Satan XMas V7, Dream Of Pirates, Gemini 4.2 DM7000, etc. Flash Wizard Works fine with SifTeam Image in order to install multiboot images.
4. There is another way to install images. From Web browser we write the IP of Relook 250 and connect to its web server. now from Config Menu we choose Boot Manager and click add to install new image to HDD.
5. SifTeam image is compatible with mgcam1.23 nabilo version. At first step we can install that emulator. it is possible to copy mgcam1.27a file to the same BIN directory and rename it to mgcam1.23 and change attribute to 755. in this manner there is no need to change all files containing ini information of "mgcam1.23". SifTeam image can open TPS,... with these changes. Another way is to install mgcam1.27a nabilo version directly
5. I have more than 7 Installed (HDD Images) in my Relook and all of them work properly.
6. After all successful attempts, I have noted that it is impossible to standby the HDD (from its menu) when you are using an HDD installed image. It's obvious because the active image is on HDD and the Box needs it all the time. Every time I standby the HDD it restart after 2 seconds!! This make some problems:
First: you have the Noise of HDD all the time
Second: your HDD works all the time!!! even when you have no recording activity
what is your viewpoint?
Thanks again for your helps.
Happy new year to all my kind friends in this forum.
With best wishes for all of you in the new year
Many Thanks for your kindness and help. Yesterday I searched many sites on the web. Finally I found the solution. I implemented it successfully and hereby I write required steps:
1. Install SifTeam 1.8.5.1.250 to the flash of Relook 250 (I got it in our forum)
2. Install Flash Wizard Pro 6.3 (From SifTeam which is adapted for Relook 250) to the PC
3. There Are many DM7000 images that can be installed on the Hard Disk of Relook. For Example Satan XMas V7, Dream Of Pirates, Gemini 4.2 DM7000, etc. Flash Wizard Works fine with SifTeam Image in order to install multiboot images.
4. There is another way to install images. From Web browser we write the IP of Relook 250 and connect to its web server. now from Config Menu we choose Boot Manager and click add to install new image to HDD.
5. SifTeam image is compatible with mgcam1.23 nabilo version. At first step we can install that emulator. it is possible to copy mgcam1.27a file to the same BIN directory and rename it to mgcam1.23 and change attribute to 755. in this manner there is no need to change all files containing ini information of "mgcam1.23". SifTeam image can open TPS,... with these changes. Another way is to install mgcam1.27a nabilo version directly
5. I have more than 7 Installed (HDD Images) in my Relook and all of them work properly.
6. After all successful attempts, I have noted that it is impossible to standby the HDD (from its menu) when you are using an HDD installed image. It's obvious because the active image is on HDD and the Box needs it all the time. Every time I standby the HDD it restart after 2 seconds!! This make some problems:
First: you have the Noise of HDD all the time
Second: your HDD works all the time!!! even when you have no recording activity
what is your viewpoint?
Thanks again for your helps.
Happy new year to all my kind friends in this forum.
With best wishes for all of you in the new year
- Messages
- 6,174
You can now.
@golpesar, when I had dm7000 I always installed multiboot images to usb stick to avoid hearing hdd noise.