Sexview ?

edit · Mar 26, 2008

Down on Eurosky DVB 8004 Super , Globo 5000 CI too. It seems in all EMU.

ekologisk · Apr 13, 2008

I still cant get picture on sexview channels

I put the newest key in "vplug editpr ---> keys"
30 I 0606 06 <<<<KEY********>

Here is my conf. Please help me, guys

SBCL.INI

PHP:

[SETTINGS]
Top=109
Left=361
AutoHide=1
HidePasswd=0
ServersAutostart=1
ServersDebug=1
PluginsDebug=1
ShowDebug=1
PluginsDelay=100
Plugins2KTimeout=100
PluginsDefSID=0
PluginsForce=1
HideOnExit=1
LangSelect=1
ShutdownCMD=shutdown
ShutdownARGS=-s -f
AutoDownEnabled=0
AutoDownH=0
AutoDownM=0
OwnECMTable=1
[TUNER]
Autostart=1
Debug=1
CommType=2
SeasonTuner=4
SeasonCom=0
SeasonSpeed=11520
SeasonTimeout=2000
SeasonDelay9000=0
SeasonDelay901D=0
RSTuner=0
RSCom=0
RSDWDelay=100
TCPAddress=10.14.0.250
TCPPort=6001
TCPProtocol=1
TCPNcdPrvs=00050000000000062CE93301007c000000000000000000007C0000000000000000000000
[SBCLx2]
Address=127.0.0.1
Server=1
NoOwnServer=0
Autostart=0
Info=1
Debug=1
[Server1]
Protocol=0
Address=
Port=0
DESKey=0102030405060708091011121314
EchoEnabled=0
Login=
Password=
PrvsMethod=3
Prvs=
Enabled=0
[Server2]
Protocol=0
Address=
Port=0
DESKey=0102030405060708091011121314
EchoEnabled=0
Login=
Password=
PrvsMethod=3
Prvs=
Enabled=0
[Server3]
Protocol=0
Address=  
Port=0
DESKey=0102030405060708091011121314
EchoEnabled=0
Login=
Password=
PrvsMethod=3
Prvs=
Enabled=0
[Server4]
Protocol=0
Address= 
Port=0
DESKey=0102030405060708091011121314
EchoEnabled=0
Login=
Password=
PrvsMethod=3
Prvs=
Enabled=0
[Server5]
Protocol=0
Address=
Port=0
DESKey=0102030405060708091011121314
EchoEnabled=0
Login=
Password=
PrvsMethod=3
Prvs=
Enabled=0
[Server6]
Protocol=0
Address=
Port=0
DESKey=0102030405060708091011121314
EchoEnabled=0
Login=
Password=
PrvsMethod=3
Prvs=
Enabled=0
[Server7]
Protocol=0
Address=
Port=0
DESKey=0102030405060708091011121314
EchoEnabled=0
Login=
Password=
PrvsMethod=3
Prvs=
Enabled=0
[Server8]
Protocol=0
Address=
Port=6010
DESKey=0102030405060708091011121314
EchoEnabled=1
Login=
Password=
PrvsMethod=0
Prvs=
Enabled=0
[Server9]
Protocol=0
Address=
Port=6010
DESKey=0102030405060708091011121314
EchoEnabled=1
Login=
Password=
PrvsMethod=0
Prvs=
Enabled=0
[ECM1]
Descr=Cyfra+
CAID=0100
PrvID=0065
Pattern=x0 61 0065 xxxx xx 1001
Match=0
[ECM2]
Descr=Polsat
CAID=1801
PrvID=7101
Pattern=30 47 07 45 7101
Match=0
[ECM3]
Descr=Premiere
CAID=1702
PrvID=0000
Pattern=70 51 xxxx xxxx xx 1010
Match=2
[ECM4]
Descr=TPS
CAID=0500
PrvID=7C00
Pattern=70 6x
Match=2
[ECM5]
Descr=CSAT
CAID=0100
PrvID=0080
Pattern=00 6x 00 80
Match=2
[NOTIFY]
Enable=0
Server=poczta.twojserwer.pl
[email protected]
Notify1=0
Notify2=0
Notify3=0
Notify4=0
Notify5=0
[Plugin vPlug]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=1
[Plugin S2-Emu]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=0
[Plugin WinCSC]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=1
[Plugin Poor Man's CAM]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=1
[Plugin gboxplugin by MOWER]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=1
[Plugin DVBCore Wrapper]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=0
[Plugin Cardserver Client]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=1
[Plugin Soft-CI]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=0
[Plugin UVCE]
BufferSize=184
PrvsMethod=1
Prvs=
Enabled=1
[ECM6]
Descr=TPS
CAID=0500
PrvID=7C00
Pattern=70 2x 
Match=2
[ECM7]
Descr=C+
CAID=0100
PrvID=0081
Pattern=00 6x 00 81
Match=2
[ECM8]
Descr=SV
CAID=0606
PrvID=
Pattern=xx
Match=0
TCPNcdPrvs=00060600000000062CE932010000000000000000000000

MG_CNF

PHP:

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 25 10

# network ecm timeout in seconds
K: { 1 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 03 } 172.16.1.100 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }

VPLUG.INI

PHP:

[main]
active=0
TPS_AU=1
DW_even_Delay_ms=5
DW_odd_Delay_ms=5
use_TTTrick=0
use_KS_driver=0
InternetAccess=1
FilesPath=
SystemTrayIcon=1
TranspondersPath=e:\dvbapp\plugins\Transponders
TranspondersUpdateURL=http://joshyfun.peque.org/transponders
AutoStartCardSharing=0
AutoPMT=1
DefaultCSA=FFDecsa_64_MMX.mdl
AutoECM=1
PlusMinusGMT=0:0:+
AutoCAT=1
SOT=0
SatTime=1
RMLOS=0
lang=english.lng
DisableAU=0
TopPos=145
TopLeft=801
vPlugGUILog=1
DecodeAllAudioPids=0
Retevision=0
CAID_IgnoreList=1803, 0919, 093B, 4AA1, 4AD0, FFFF, 0B00, 4AD4
ProviderID_IgnoreList=022600, 020010, 022610, 023800, 025100, 023B00, 025110, 007A, 024400, 021C00, 020910
ECM_Filter_Timeout_Sec=86500
PMT_Filter_Timeout_Sec=7
CAT_Filter_Timeout_Sec=7
 
[Proxy]
UseProxy=0
Host=
Port=1080
Version=5
Authentication=0
UserName=
Password=

OUTPUT from VPLUG

PHP:

15:36:03: Disconnecting IP 10.14.0.250 from TunerTCP
15:36:19: Connecting IP 10.14.0.250 to TunerTCP
15:36:19: TCP Ncd RX: 004000006D67076400000011E00028746573740024312461626364656667682469725762626C6E706D772E357A377767426E707268300067458D
15:36:19: TCP Login accepted
15:36:19: TCP Ncd TX: 000000000000000000000000E10000
15:36:19: TCP Ncd RX: 001800000000000000000000E3000051DC6E
15:36:19: TCP Sending Card Info
15:36:19: TCP Ncd TX: 000000000000000000000000E4002400050000000000062CE93301007C000000000000000000007C0000000000000000000000

Efeoglu · Apr 14, 2008

AU with my Octagon :nana:

kitvictor · Apr 15, 2008

Efeoglu said:
AU with my Octagon :nana:

SexView I2 13E
ident: 0606 (DEC: 006 006 )
No keys allowed here

ekologisk · Apr 15, 2008

Hi!
Can someone help me, please?

Tell me whats wrong...

pool12 · Apr 22, 2008

@ekologisk

which version of vplug are you using? for me the newer versions >2.17 wont work, but its no problem, with newest keys sv ist still open...

test your sbcl.ini for following listings:

TCPNcdPrvs=00060600000000062CE932010000000000000000000000

and

[ECM8]
Descr=SexView
CAID=0606
PrvID=00
Pattern=xx
Match=0

pool12

ekologisk · Apr 23, 2008

pool12 said:
@ekologisk

which version of vplug are you using? for me the newer versions >2.17 wont work, but its no problem, with newest keys sv ist still open...

test your sbcl.ini for following listings:

TCPNcdPrvs=00060600000000062CE932010000000000000000000000

and

[ECM8]
Descr=SexView
CAID=0606
PrvID=00
Pattern=xx
Match=0

pool12

Hello my friend!

I use vplug 2.1.8

I'm a little bit closer.
Vplug tells me last ecm, (match to sv, caid 0606, prov 00)
But mgcamd om my dreambox says "system conax prov 000000 sid 0x1e7b" (sexview exta)
Before todays changes there was "system viaccess"

Any solution, please?

pool12 · Apr 23, 2008

which emu do you use?

try to delete every old sv key in softcam,keytext.... and maybe test your priority.list for entry X: { 06 06 }

pool12

ekologisk · Apr 23, 2008

pool12 said:
which emu do you use?

try to delete every old sv key in softcam,keytext.... and maybe test your priority.list for entry X: { 06 06 }

pool12

Mgcamd 1.29

I changed vplug to 2.2.2

Now these channels talk irdeto2...
BUT.. Look at this ?!

PHP:

[2008-04-23 20:08:06]  SBCL - SBCL v1.0i.exe  - vPlug2.2.2 - 2008-04-23 20:08:05 - Irdeto2->Err: Access violation at address 00000000. Read of address 00000000

ekologisk · Apr 23, 2008

CCAM 2.08 + Vplug 2.18

Vplug log:

[2008-04-23 22:20:57] SBCL v1.0i:SBCL - tp_id=$0000, SID=$36B8, PMT=$0000
[2008-04-23 22:20:57] SBCL v1.0i:SBCL - ECM from SidCache: $00FF
[2008-04-23 22:20:57] SBCL v1.0i:SBCL - StartECM_Filt-> $00FF
[2008-04-23 22:20:57] SBCL v1.0i:SBCL - Added PMT filter, pid=$0000
[2008-04-23 22:20:58] SBCL v1.0i:SBCL - EMM-CA: Standarized systems
[2008-04-23 22:20:58] SBCL v1.0i:SBCL - Starting I2(0606) emm filter ...
[2008-04-23 22:20:58] SBCL v1.0i:SBCL - Starting EMM filter on pid: $1D4C
[2008-04-23 22:21:04] SBCL v1.0i:SBCL - PMT Pid =$0000, SID =$36B8
[2008-04-23 22:21:04] SBCL v1.0i:SBCL - Timeout… This PID is empty. Rescan...

pool12 · Apr 24, 2008

yes its the same for me with vplug >2.16:

SBCL v1.0i:SBCL - Timeout… This PID is empty. Rescan...

try vplug version 2.16 with new v_keys.db and it should work

pool12

ekologisk · Apr 24, 2008

Hi!
Can I get your installation of sbcl + vplug2.16, please? Mail?

date on v_keys.db = 20080423

http://geting.se/viewimage.php?image=98772-vplug216.jpg

akavun · Apr 24, 2008

VPlug 2.2.2.0 FULL II
http://www.sat-universe.com/showthread.php?p=171860#post171860

it3at.org · Apr 26, 2008

Down key ?

jacop14 · Apr 26, 2008

it3at.org said:
Down key ?

There isn't no new master pmk Key

ekologisk · Apr 30, 2008

Any keys out in cyberspace?

saned · Jun 29, 2008

try vplug version 2.16 with new v_keys.db and it should work

Sexview ?

edit

Member

ekologisk

Efeoglu

kitvictor

ekologisk

pool12

Registered

ekologisk

pool12

Registered

ekologisk

ekologisk

pool12

Registered

ekologisk

akavun

it3at.org

jacop14

Senior Member

ekologisk

saned