Settings menu stack in DM-600PVR with GP Ver.4.60

[AntonisV]

Hi

A friend of mine buy a DM-600PVR and was gived to me to make all the settings.

So i install the GP 4.60 in flash and the Barry Allen plugin for multi boot. After i install and the Darkstar 2.

First i make all the setting in Darkstar2 and i scan for channels and everything was ok. After i do the same in the GP-460 but by mistake when ask me about the sat installation i press exit and i continue with the rest settings. Now when i go to the setting menu in Gemini the dreambox stuck and only if i unplug the power gord working again. I believe that the problem is that i don't scan for channels.
Is anyway to take all that settings from the Darkstar and put it in GP?
OR
Is anyway to make the GP to start the setting wizard again?

Thx
Antonis


PS
Sorry about my poor english

 

[Ferret]

Do a factory reset or re-flash it mate.

If i were you id try another image other than that group. EDG and Nabilo are trustable groups.

Ferret

 

[AntonisV]

I don't want to re-flash.
The friend of mine he prefered the gemini because is use to work with another dreambox.

 

[Ferret]

Ok mate disconnect hard drive, leave it unplugged for 10 mins or so reboot then try a rescan.

Ferret