sd channels problem via hdmi at 60Hz

[sadlove]

i have problem with sd channels when i use hdmi cable
HD channels is working fine without any problem

i use these sittings

dvi
1080i
60Hz <-- because i have ntsc tv

i used all new images from every team the same problem

after i used vti 0.6 image its working just fine :clapping:


is there any problem with the new images ?

thanks in advanced

 

[sadlove]

i know what the problem with the new images

after i try vti 0.8

the only main change in the image is

"New* Improve HDMI/Component video PQ(Picture Quality)"

and thats the problem

any idea how to solve it ?

 

[Ferret]

Hi mate

Have you tried running 720p.

You may or may not know but progressive is a better standard than interlace .

See if you have the same issues at 720p

Ferret

 

[sadlove]

Hi mate

Have you tried running 720p.

You may or may not know but progressive is a better standard than interlace .

See if you have the same issues at 720p

Ferret

yes i did its the same problem

i hope vti and DL teams solve this problem in there new images

i wrote the problem to the vu+ supporter i hope they fix it asap

thanx for replay cause no one replay to my problem in other forums :mecry:

p.s. now i'm using vti 0.7 and i cant go higher
the sd channels and hd channels are not good "PQ" like the new images

 

[Ferret]

As you know mate they released a driver to enhance the PQ on 08 so maybe your TV set is just one that this did not agree with. For me after 08 the PQ improved a lot. I also tweaked this further with the Video enhancement and Auto res plugins.

Have you tried these plugins?

Ferret

 

[sadlove]

i try the Video enhancement and Auto res plugins.
but my problem is there
in hd channels every thing is working perfect 100%
but with sd it comes ghosty like this

and when i use pan&scan

its working good but as you know the pictures edge became out of the tv

when i use 50Hz all channels work just fine

 

[sadlove]

ok here is strange thing just happened
i install DL 1.1 to flash
and vti 1.0 to flash memory and vti 1.1
i reboot via meoboot

and all worked just fine

i think both vti take drivers from DL 1.1

any way i'll use DL 1.1 its has high QP than vti
and green panel and blue panel

i'll stay with it till DL team found whats the problem with

sd channles on 60Hz

and the problem are on the channels with these #

704*576
480*576
720*576

the other sd channels like those are working just fine

544*576
352*576
352*288

thats very strange problem i ever have

so DL team give me your best and i'm ready to try it on my VU+duo

thank you all

 

[sadlove]

can any one try the new vti 2.0 img and replay if the problem is exist or gone
try some sd channels on 60Hz

thanx all

 

[lekshmy]

@sadlove
In HDTV we usually do not use the NTSC/PAL nomenclature. But it applies and is important in SDTV. The field rate of 1080i transmission is typically 60Hz for NTSC countries and 50Hz for PAL/SECAM regions. So in my opinion, despite your TV is for NTSC region, you should set the TV and/or STP to 50Hz for clearer pictures as you are receiving transmission from PAL/SECAM regions. By setting your TV to 60Hz you are not improving any quality in HD, but causing serious conversion issues to the processor(s) in your TV. For a better understanding of conversion issues, please read http://en.wikipedia.org/wiki/Television_standards_conversion

 

[sadlove]

@sadlove
In HDTV we usually do not use the NTSC/PAL nomenclature. But it applies and is important in SDTV. The field rate of 1080i transmission is typically 60Hz for NTSC countries and 50Hz for PAL/SECAM regions. So in my opinion, despite your TV is for NTSC region, you should set the TV and/or STP to 50Hz for clearer pictures as you are receiving transmission from PAL/SECAM regions. By setting your TV to 60Hz you are not improving any quality in HD, but causing serious conversion issues to the processor(s) in your TV. For a better understanding of conversion issues, please read http://en.wikipedia.org/wiki/Television_standards_conversion

ok why its work on old firmware like DE 1.1
and vti 0.7
on the new firmware after those sd channels are not working
so the problem is the new driver vu+ team are adding in the new images

 

[sadlove]

any news because [email protected] didnt respond to my emails

 

[Alan02]

NTSC 60HZ problem and Vu plus solved !!!

After installing openspa image and downloading new autoresolution glt3818, problem has been solved. Now my samsung ntsc lcd is working perfectly with the vu plus receivers. Just download the new autoresolution glt3818 plugin and install it. Then enable yes, after that change the sd25/50hz to 1080p30. Secondly, 720p and 1080p refresh rate should be 60hz. Thats it ! :bravo::bravo::bravo: