Running Cline on OSCam_ymod

[kennyboy]

ive put this on my v+ box with black hole 1.7.8 ive used this that was in the thread

[reader]
label = server
enable = 1
protocol = cccam
device = dyndns of cs_server,port
account = user,password
group = 2
CAID =
Ident =
Services =

what i want to know do i add anything to my cccam config ie fline or do i make cline like the 1 above because at the minute it dont seem to work any help please thanks.

 

[xXTomXx]

account = user,password

wrong.

correct:
user = user
password = password

 

[kennyboy]

thanks for reply so is this right
[reader]
label = server
enable = 1
protocol = cccam
device = C: sat.univrse.org 12000
user = test1
password = test2
group = 2
CAID = 0963
Ident = 0963:000000
Services = freesat

and what about cccam config file do i have to put cline or fline or no line im running cccam 213 thanks for your help.

 

[xXTomXx]

sorry. i´ve just see that you are using ymod instead of a regular oscam. not sure if my answer was correct for this.

 

[kennyboy]

ok thanks for reply and thanks for your help.yes are my osacm cofigs files if some1 can help please

[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
pidfile = /tmp/oscam.pid

[dvbapi]
enabled = 1
user = xxxxxxx
au = 1
boxtype = v+box duo

[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1

[reader]
label = server
enable = 1
protocol = cccam
device = C: sat.univrse.org 12000
user = test1
password = test2
group = 2
CAID = 0963
Ident = 0963:000000
Services = freesat

[account]
user = xxxxxxx
group = 1
caid = 0963
ident = 0963:000000
au = 0
monlevel = 0
i hope this is ok . where am i gonig. do i need fline,cline.or no line i tryed all different was. got latest keys still nothing works not even my white sly card. top slot v +duo image bh 1.7.8 any help please. thanks

 

[just4fun2]

[dvbapi]
enabled = 1
user = xxxxxxx
au = 1
boxtype = dreambox


[reader]
label = server1
protocol = cccam
device = sat.univrse.org,12000
account = test1,test2
group = 2
version = 2.1.3
build = 3165
reshare = 1
CAID = 0963
Ident = 0963:000000


hi, i corrected a little more, it is working like this on my box

 

[kennyboy]

thanks for reply well tryed that still nothing works. i got everything in the right place and ther my config.and you use this boxtype = dreambox when i v+box duo thats why i put that boxtype thanks

 

[just4fun2]

you use this boxtype = dreambox when i v+box duo thats why i put that boxtype thanks

Hello, no i use also a vuduo I forgot to ask: wich Ymod do you use? Ymod 34 for BH img i suppose? if yes, it seems to not work with the cline, i have the same pb but working fine with emu/oscam.keys example french HD tf1, fr2, arte, m6 & more

 

[enzos]

http://www.sat-universe.com/attachment.php?attachmentid=301413&d=1330056387

 

[kennyboy]

Hello, no i use also a vuduo I forgot to ask: wich Ymod do you use? Ymod 34 for BH img i suppose? if yes, it seems to not work with the cline, i have the same pb but working fine with emu/oscam.keys example french HD tf1, fr2, arte, m6 & more

yes im useing ymod 34 for bh 1.7.8 thanks.

ps do you have any line in your cccam config at all thanks.

 

[kennyboy]

http://www.sat-universe.com/attachment.php?attachmentid=301413&d=1330056387

thanks just downloeded so ill have a look soon thanks for help.

any advice with cccam do i need a line thanks

 

[kennyboy]

http://www.sat-universe.com/attachment.php?attachmentid=301413&d=1330056387

thanks enzons but im having some iseues with this ive put all the files in so ive got script executer in my puglins.the only way to start ymond34 is blue button select oscamymond34 and the go into script executer start oscam emu then i have to select cccam emu to get it to work and it stays connected for about a minute then goes of the keys work ive got latset keys ones in but my peers go off so i have no shares also this is cccam 2.3 is there anyway of changing that. ive tryed these ccccam config
but no joy

C: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
C: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# CCcam v2.3.0
SERVER LISTEN PORT : 127
TELNETINFO LISTEN PORT : 7000
WEBINFO LISTEN PORT : 128
ZAP OSD TIME : 0
SHOW TIMING : yes
MINI OSD : no
#DEBUG : no
SCIDEVICES: 2
# EMM blocker
# 00 - nothing
# 01 - sa blocked
# 02 - ua blocked
# 04 - ga blocked
# B: /dev/sci0 07
# B: /dev/sci1 01
DISABLE EMM : no
GLOBAL EMM : 1
EXTRA EMM LEVEL : no
EMM THREADS : 1
# BOXKEY: /dev/sci0 00 11 22 33
SOFTKEY FILE : /usr/keys/SoftCam.Key
AUTOROLL FILE : /usr/keys/SoftCam.Key
CAID PRIO FILE : /etc/CCcam.prio
NEWCAMD STEALTH : 0
SECA HANDLER: 1
#
and this this is mine
#
SERVER LISTEN PORT : 12345
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : user
WEBINFO PASSWORD : password
TELNETINFO LISTEN PORT : 16000
TELNETINFO USERNAME : user
TELNETINFO PASSWORD : password
ZAP OSD TIME : 3
OSD USERNAME : user
OSD PASSWORD : password
OSD PORT : 80
BOXKEY: /dev/sci0 00 11 22 33
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : yes
DISABLE EMM : no
GLOBAL EMM : 1
EXTRA EMM LEVEL : yes
EMM THREADS : 1
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
MINIMUM DOWNHOPS: 0
#LOG WARNINGS : /tmp/warnings.txt
#
and these are my config files

[global]
nice = -1
WaitForCards = 1
Preferlocalcards = 0
Lb_mode = 1
Netprio = 1
Cachedelay = 120
Max_cache_time = 15
Max_cache_count = 1000
Disablelog = 1
ClientTimeout = 3
Clientmaxidle = 200

[webif]
HttpPort = 12345
HttpUser = user
HttpPWD = password
HttpRefresh = 10
HttpAllowed = 127.0.0.1,192.168.0.xx-192.168.1.255
Httpdyndns = 192.168.0.xx # IP del router #
HttpReadOnly = 1

[cccam]
Port = 12345
Ignorereshare = 1
Stealth = 0
Keepconnected = 1
Version = 2.1.1

[dvbapi]
User = user
Enabled = 1
Group = 1
Boxtype = dreambox
AU = 2

[reader]
label = skyuk
protocol = cccam
device = sat.univrse.org,12000
account = test1,test2
cccreshare = 2
Group = 1

[account]
user = user
au = 0
group = 1

thats whats in my box now so what have i done wrong do i need a script or a line putting in cccam config ie nlines llines flines clines or can some1 tell me if there useing this and is it working for you if so how any help please.thanks

 

[just4fun2]

yes im useing ymod 34 for bh 1.7.8 thanks.

ps do you have any line in your cccam config at all thanks.

Hi, i´ve changed BH or BP for PLi 3.0, oscam work like a charme with keys or cline..try it & if you have pb i can copy my cfg

 

[Calokay]

Keys go to oscam.keys (SoftCam format) or ccw to constantcw (CCcam format) All in config - way: usr/tuxbox/config

 

[just4fun2]

Keys go to oscam.keys (SoftCam format) or ccw to constantcw (CCcam format) All in config - way: usr/tuxbox/config

Are you shure inside oscam Ymod tgz file for BH the files are in usr/bin for oscam, camscript/script/, uninstall/script & etc/tuxbox/config for all cfg/oscam.keys

 

[kennyboy]

Keys go to oscam.keys (SoftCam format) or ccw to constantcw (CCcam format) All in config - way: usr/tuxbox/config

thanks for input bet ive said all the files are in the right places its the disconnection bit that i what is wrong thanks

 

[kennyboy]

Are you shure inside oscam Ymod tgz file for BH the files are in usr/bin for oscam, camscript/script/, uninstall/script & etc/tuxbox/config for all cfg/oscam.keys

thanks for your input no none of the usaly files are not there the ones in your folders you mentioed thats why i was asking about the script .and i put them in manauly.there dont show in blue button cams thanks

 

[kennyboy]

there is a script for ymond 34
here it is
#
CAMNAME="OScamYmod18T34"

remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
remove_tmp
/usr/bin/oscamYmod18-t34 &
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
killall -9 oscamYmod18-t34 2>/dev/null
sleep 1
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac

exit 0