Blindscan causes all sorts of issuse and fails more often than not.I have a roblem with the box during blind scan the common AC was off and when it come back the box keeping restarting even I load new SW 1.06 bot no way it keep starting any solution?
so what I can do nowBlindscan causes all sorts of issuse and fails more often than not.
New firmware is being worked on to stop these scanning issues.
If you keep trying it will sometimes complete.so what I can do now
Read thiswhen I download the firmware it write installing update and after that erase so it start the box and the problem remains
E2 working
Please can you send Coke instraction because I can not load any firmware to the androide side.. and 100% correct. I've just been through this experience after getting Android bootloop. It was no fun at all and took a long time to re-install EVERYTHING from scratch.
Thanks to Coke for his instructions as otherwise it would have been impossible.
Qviart should really have a convenient way to make a "whole box" back-up that could easily be restored in the event of a bootloop - which, from what I hear, is not that rare.
IMHO This box is only at alpha stage and needs a lot of development to remove the many bugs before it can be considered reliable and user friendly.
It has potential but is not a finished product yet.
A little more about getting recovery. I found I needed to press OK about 20 times within about 5 seconds to get the "RECO" on the screen. You can only start pressing "OK" (very rapidly) as soon as you see "BOOT" on the display. You may need to repeat this if it does not work on first attempt.
He is referring to this post:Please can you send Coke instraction because I can not load any firmware to the androide side
thanks
Hi thanks for your help the problem solvedRead this
Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide
Why do you need the e2 side out of interest, what benefit over the android os? I also find the E2 side more familiar as this is what I have been using for many years. Add to that i can easily flip between different images on the E2 side and then boot back into Android for the forever server and...www.sat-universe.com
Your going to loose images on the e2 side redoing the android side though.
You dont need Neoboot.I install multiboot / neoboot it istalled on extenal flash but I am not able to install any image I need it to test new image before sending it to the internal flsh if its corrupted can cause problems .
I run dual on Forever im not in Spain though.Is it possible to put Forever IKS service on Qviart Dual? I've been told that spain receivers are not supported in these days.
Me neither. Do you use last 1.06 firmware with original launcher? Thank you!I run dual on Forever im not in Spain though.
1.06 as it comes yes no additional launcher.Me neither. Do you use last 1.06 firmware with original launcher? Thank you!
You have asked the same question before.When I can use the recovery image and how
BR