Problem with RF Modulator

[ciscostaz]

I noticed yesterday that the RF connection from my Starsat sr-x5300CU super to the other TVs in my is no longer working. This happened after the last two updates.

RF changed to 3 - 4 channels. Very strange

On navigating into the tv system, I noticed that the RF settings which used to have an options for selecting between channels 21- 69 (UHF) have changed to RF

 

[ciscostaz]

in addition, ....

so the RF Modulator for changing from channels 21 - 69 have automatically changed to RF 3-4 Channel which is very strange to me.

Could somebody assist me because I dont know what to do. Is it that the Starsat manufacture have changed their firmware without telling informing us or what? Please help me because I need to the RF to work the way it used to be.

 

[ciscostaz]

I used the Cleaner software, I returned the decoder to Factory default and yet, problem still persist.

Please, Tani, Deporte, Marokino, Ronaldo and all the gurus of this forum, Help me resolve this problem.

 

[deporte]

Mate y u sitll Using RF ?!!!! it's strange for us !!
may be thier of the change that make is the reset or facturty reset is maked this problem coz till now i did not show any problem like this !!!

 

[ciscostaz]

@Deporte
Thanks for responding.

Dont get me wrong. I still use the AV in the parlour with the TV(1) however, I used an RF to take the signal, using coaxial cable, into the bedroom TV (2) which is about 7 metres away from the parlour. Is there a way I can connect the second tv without using the RF? please tell me so that i can do that. Thanks.

 

[ciscostaz]

any help from anybody? I have tried all and yet the RF connection point is still not working. Any moresat guy to help?